Non-Metallic Sheathed Cable Staples
Milwaukee® MNM1-600 MNM Insulated Cable Staples, 0.75 in W Crown, 3 in L Leg, Galvanized steel, Gray
The MILWAUKEE® 1” Insulated Cable Staples are used for fastening electrical cables to wood surfaces during the electrical rough-in process. Only compatible with MILWAUKEE® M12 Cable Stapler (2448). UL/CUL approved for single or double stacked 14-2, 14-3, 12-2, 12-3, 10-2, 10-3 (single only) NM-B cable installation. Also suitable for use with low voltage cables such as CAT3, CAT5, CAT6, and Coax. Each package includes 600 staples.
Gardner Bender PS-175ZN UV-Resistant Electrical Staple, Plastic
Gardner Bender PS-175ZN UV-Resistant Electrical Staple, Plastic
Gardner Bender PS-175 UV-Resistant Electrical Staple, 12 AWG, 14 AWG Cable, Plastic
These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
Gardner Bender PS-150 UV-Resistant Electrical Staple, 10 AWG, 12 AWG, 14 AWG Cable, Plastic
These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
Gardner Bender MSW-1540 Bell Wire Low Voltage UV-Resistant Fiber Insulated Staple, Steel/Polyethylene
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
Gardner Bender MSI-150 Insulated Staple With Polyethylene Strap, 12 AWG, 14 AWG Cable, Steel, Graphite Metallic
The Gardner Bender 1/2 in blue plastic metal insulated staples for 14/2 and 12/2 cable (100/PK) fasten electrical cable to wood surfaces. These staples offer a plastic sheath to prevent arc faults if the staple is over-driven through a cable jacket.
Gardner Bender MS-175 Recessed Head Contractor Length Metal Staple, 1-1/4 in L Leg, 14 AWG, 12 AWG, 10 AWG Cable, Steel
These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer.
ROMEX CABLE STAPLES--BX/500
Recently Viewed
EATON Power Defense™ PDG63P2000E4ZN Globally Rated Molded Case Circuit Breaker, 600 V AC, 2000 A, 100 kA at 480 V/65 kA at 600 V Interrupt, 3 Poles, Electronic Trip
The Power Defense™ molded case circuit breaker portfolio is globally rated in a small footprint for easy adaptability no matter the application or project requirement. A circuit breaker with communicating electronic trip units and the ability to generate the data to help you optimize your facilities performance and to help keep your employees, customers and end-users safe by reducing the risk of arcflash events.
EATON 10250T4 Heavy Duty Oiltight/Watertight Non-Illuminated Push-Pull Operator, 30.5 mm, 2NC Contact, 3 Positions
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
GENERAL® CT6235B Contact Tachometer, +/- 0.05% of Reading + 1 Digit Accuracy, 50 mm to 10 km, 5-Digit LCD Display
GENERAL® CT6235B Contact Tachometer, +/- 0.05% of Reading + 1 Digit Accuracy, 50 mm to 10 km, 5-Digit LCD Display
EATON 10250T16777 Heavy Duty Non-Illuminated Oiltight/Watertight Selector Switch Operator With Cam Code 7, 30.5 mm, 4 Positions
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
Blackburn® 1H High Strength Split Bolt Connector, 6 to 2 AWG Conductor Solid/Stranded Copper Conductor, 11/16 x 1-11/32 in Bolt, Bronze Alloy
Blackburn® 1H High Strength Split Bolt Connector, 6 to 2 AWG Conductor Solid/Stranded Copper Conductor, 11/16 x 1-11/32 in Bolt, Bronze Alloy
Each heater is identified by a catalog number stamped on one terminal. The heater application table indicates the range of full load motor current to which a given heater may be applied. Heaters should be selected on the basis of the actual full load current and service factor as shown on the motor nameplate or in the manufacturer's published literature. When motor and overload relay are in the same ambient and the service factor of the motor is 1.15 to 1.25, select heaters from the heater application table. If the service factor of the motor is 1 or there is no service factor shown or a maximum of 115% protection is desired, select one size smaller heater than indicated.
