Diversitech WG840739HT High Temperature Condenser Fan Motor, 3/4 hp, 460 V AC, 60 Hz, 48 Frame, 1075 rpm Speed
These motors install with all standard 48 frame mounting brackets. They are a quiet operator and electrically reversible. There is an Automatic Thermal Overload Protector and they have class B insulation. They have 30 in leads and 60 Hz with low power consumption. The motor has a standard 48 frame motor casing size and has drain holes with plugs on both end plates. There is a continuous air over on this motor and a 70 deg C Ambient Design with Extended Studs.
-
BrandDiversitech
-
UPC095247139217
-
Manufacturer Part NumberWG840739HT
-
CountryUSA
-
Temperature Rating70 deg C Ambient
-
Frame48
-
Frequency Rating60 Hz
-
TypeHigh Temperature
-
RotationReversible
-
Voltage Rating460 V AC
-
Amperage Rating2.6 A Full Load
-
Application TypeCondenser Fan Motors
-
Horsepower3/4 hp
-
Bearing TypeBall
-
Number of Speeds1
-
Insulation ClassClass B
-
Speed1075 rpm
- Extended bolts - extended mounting bolts provides easier installation in cramped spaces and allows the installer to start the threaded mounting nut quickly and efficiently
- Supportive foam cradle - A unique styrofoam cradle inside the motor carton supports and protects the motor, shaft, and mounting bolts during shipment
- Large label - the informative product label contains the motor model number in large, easily identifiable type
- Capacitor size on box - the appropriate size of 370 VAC run capacitor is noted on every motor carton
- Ball bearings - fractional horsepower motors include ball bearings which allow greater heat endurance, improve performance, increase reliability, and enhance motor life
- Large wiring diagram - Detailed and large wiring diagrams are on the motor and the motor carton, and also in the installation and safety instruction sheet
- Carton handle - the motor carton has been designed with an innovative handle to make the motors much easier to carry
- For customer convenience, Wagner provides a complete manufacturer cross-reference on the side of every motor carton
- Insulated disconnects - run capacitor connections are insulated for increased safety
- The flag disconnects on condenser fan motors and inline disconnects on direct drive furnace blower motors are provided
- Easy-to-read packaging - the vibrant design of the fractional horsepower motor's packaging makes reading easy and direct
- The distributor can identify the stock of motors on the shelf with ease, the application, voltage, and horsepower of the motor are clearly visible
- Extended wires - Wagner motor wires are thirty inches long
- The added length makes it easier for the contractor to install the new motor
- Reversing plug - the electrical reversing plug simplifies rotation direction changes
-
UNSPSC26101105
-
Package Description90/PL
-
Warranty2 years
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Diversitech WG840739HT High Temperature Condenser Fan Motor, 3/4 hp, 460 V AC, 60 Hz, 48 Frame, 1075 rpm Speed
These motors install with all standard 48 frame mounting brackets. They are a quiet operator and electrically reversible. There is an Automatic Thermal Overload Protector and they have class B insulation. They have 30 in leads and 60 Hz with low power consumption. The motor has a standard 48 frame motor casing size and has drain holes with plugs on both end plates. There is a continuous air over on this motor and a 70 deg C Ambient Design with Extended Studs.
Diversitech EnforcerĀ® 8-WH16 Wasp and Hornet Killer, 16 oz, Aerosol Spray/Liquid Form, Clear, Mild Odor/Scent
Diversitech EnforcerĀ® 8-WH16 Wasp and Hornet Killer, 16 oz, Aerosol Spray/Liquid Form, Clear, Mild Odor/Scent
For the most demanding tasks, the Denali Aire 20-inch high velocity floor fan is your answer. Its impressive 20-inch diameter metal fan blades are propelled by a high-velocity aluminum oil bearing motor, delivering unparalleled air circulation. With three-speed settings and adjustable tilt, it provides targeted cooling in any setting. Built for industrial use with metal construction and a rugged finish, it is built to last.
KleinĀ® D203-8N Heavy Duty Long Nose Plier With Stripper, Tool Steel Jaw, 2.313 in L x 1 in W Jaw, 8.438 in OAL, 1/8 in W Tip
These Long Nose, Side-Cutters strip 12 AWG solid wire while the heavier design provides more cutting power. The cutting knives are induction hardened for maximum life. The long nose is great for grabbing and looping wire.
KleinĀ® D203-8-INS Standard Long Nose Plier, Knurled Induction Hardened Steel Jaw, 2.313 in L x 1 in W Jaw, 8.91 in OAL
Klein Tools Insulated Long Nose Side-Cutting pliers are 1000V rated for safety on the job. The long nose is designed to grab and loop wire. Dual layer, orange-over-white insulation provides a warning sign that insulation may be compromised. The molded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2012 standards for insulated tools. Cutting knives are induction hardened for long life.
KleinĀ® D203-8N Heavy Duty Long Nose Plier With Stripper, Tool Steel Jaw, 2.313 in L x 1 in W Jaw, 8.438 in OAL, 1/8 in W Tip
These Long Nose, Side-Cutters strip 12 AWG solid wire while the heavier design provides more cutting power. The cutting knives are induction hardened for maximum life. The long nose is great for grabbing and looping wire.
