Techtop GR3-CI-TF-184T-4-B-D-5 AC Motor With Class H Stator, TEFC Enclosure, 5 hp, 230/480 V AC, 60 Hz, 184T Frame, 1800 rpm Speed, Rigid Mount
Techtop GR3-CI-TF-184T-4-B-D-5 AC Motor With Class H Stator, Totally Enclosed Fan Cooled Enclosure, 5 hp, 230/480 VAC, 60 Hz, 184T Frame, 1800 rpm Speed, Rigid Mount
-
BrandTechtop
-
UPC201000001237
-
Manufacturer Part NumberGR3-CI-TF-184T-4-B-D-5
-
CountryUSA
-
Temperature Rating40 deg C
-
MaterialCast Iron
-
Frame184T
-
Frequency Rating60 Hz
-
Mounting TypeRigid
-
Voltage Rating230/480 V AC
-
Amperage Rating12.6/6.3/15.8/7.9 A
-
Service Factor1.25
-
Horsepower5 hp
-
Bearing TypeBall
-
Insulation ClassClass F
-
Special Features0.82 Power Factor
-
Speed1800 rpm
-
Enclosure TypeTEFC
-
UNSPSC26101100
-
Standards/ApprovalsEISA Compliant|Class 1|Division 2|Groups A|B|C and D
-
Warranty3 Years
-
Specification Sheet
Recently Viewed
Techtop GR3-CI-TF-184T-4-B-D-5 AC Motor With Class H Stator, TEFC Enclosure, 5 hp, 230/480 V AC, 60 Hz, 184T Frame, 1800 rpm Speed, Rigid Mount
Techtop GR3-CI-TF-184T-4-B-D-5 AC Motor With Class H Stator, Totally Enclosed Fan Cooled Enclosure, 5 hp, 230/480 VAC, 60 Hz, 184T Frame, 1800 rpm Speed, Rigid Mount
Appleton® ETP™ 4075S 4000S Non-Insulated Straight Set Screw Connector, 3/4 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
Appleton® offer ETP™ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
Appleton® ETP™ 4150S 4000S Non-Insulated Straight Set Screw Connector, 1-1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
Appleton® offer ETP™ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
Southwire GARVIN® LB150 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 1-1/2 in Hub, Die Cast Aluminum, Powder Coated
1-1/2 in LB-style conduit bodies are attached to 1-1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
Century® SD112 4-Pole Continuous Duty Motor, Totally Enclosed Fan Cooled Enclosure, 5 hp, 208 to 230/460 V, 60 Hz, 3 Phase, 184T Frame, 1758 rpm Speed, Rigid Base Mount
Arlington Snap2IT® 4110ST Cable Connector, 1/2 in Trade, 1/2 in Knockout, 0.525 to 0.705 in Cable Openings, Die Cast Zinc
Arlington Snap2IT® 4110ST Cable Connector, 1/2 in Trade, 1/2 in Knockout, 0.525 to 0.705 in Cable Openings, Die Cast Zinc
