M.K. Morse 11/16" CARBIDE-TIPPED HOLESAWS M-HS-T-11
Morse® 131117 MHSTK Hole Saw, 11/16 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
-
BrandMorse®
-
UPC050326131117
-
Manufacturer Part Number131117
-
CountryUSA|Canada
-
Chuck Size1/4 in
-
Applicable MaterialsFiberglass/Plastic/Composites/Aluminum/Carbon Steel/Computer Flooring/Fastener Embedded Wood/Stainless Steel/Tile Backer
-
Arbor Size1/2 to 20
-
SeriesMHSTK
-
Cutting Depth1-15/16 in
-
Cutting Edge MaterialCarbide
-
Cutting Edge StyleToothed
-
Diameter11/16 in
-
TPI or Pitch3 TPI
- Patented carbide tooth design for better chip clearance
- Ground set pattern
- Smoother entry for better control and cleaner cut finish
-
Alternative Part NumberMHSTK11
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Morse® 131117 MHSTK Hole Saw, 11/16 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
Morse® 116329 MHSA Advanced Hole Saw With Arbor, 2 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse.
GREEN COUNTER BRUSHES-FLP846 >
F/G HANDLED ROUND POINT SHOVELS-AME15614>
Zurn® QickTite® QV514 Unassembled Hose Bibb Valve, 1/2 in, MNPT x Male Hose Thread
Zurn® QickTite® QV514 Unassembled Hose Bibb Valve, 1/2 in, MNPT x Male Hose Thread
Glasfloss® PTA14252 Disposable Panel Filter, 14 in W x 2 in D x 25 in H, MERV: 1 to 5, 180 deg F, Domestic
The Glasfloss PTA shall be constructed of a single piece of heavy-duty, one piece craftboard frame. The metal grid shall be thermally bonded internally to the frame. The metal grids shall provide an 82 percent open area. All corners shall be closed and sealed. The filter media shall be constructed in a progressively dense fashion from air entertaining to air-leaving side. Glasfloss disposable panel filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. All filters shall be classified under U.L. std. 900.







