Koyo 30207JR Metric Series Caged Tapered Roller Bearing, 35 mm Dia Bore, 72 mm OD, 1 Row, 18.25 mm W, 55.1 kN Dynamic/60.9 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790123009
-
Manufacturer Part Number30207JR
-
CountryUSA
-
Load Capacity55.1 kN Dynamic/60.9 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed5600 rpm Grease/7400 rpm Oil
-
TypeCaged
-
Width18.25 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter72 mm
-
Bore Diameter35 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code "C" which is added as a suffix to bearing numbers
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code "J" as suffix
-
Alternative Part NumberHI-CAP30207JR
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Koyo 30207JR Metric Series Caged Tapered Roller Bearing, 35 mm Dia Bore, 72 mm OD, 1 Row, 18.25 mm W, 55.1 kN Dynamic/60.9 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
ALAN 14-THHN BLACK STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNBLK >
Features
Silicon carbide grain for fast cut rate and finest finish
Provides best durability, stock removal, and finest finish for increased productivity
Available in two densities: medium density - comparable to competitive 8SF (for general purpose deburring, blending, and weld polishing) and hard density - Comparable to competitive 9SF products (for aggressive deburring, blending)
Applications
For use on: ferrous metals, non-ferrous materials, stainless steel and high tensile materials
2" -FEMALE PIPE THREAD METAL GALVANIZED COUPLING-JPW2GC >
1/2" HOSE X 10 ORFS 90 DEG LONG-DAY10-OF-9-L-8-BW>
12 TOOTHHHN GREEN ELECTRICAL WIRE (FT)-ALE12THHNGRNSOLID >
