Roughing & Finishing End Mills
Drillco 73A148C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A156C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 7/8 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 7/8 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A164C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 74A108C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/8 in Dia Cutter, 1/4 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 74A112C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 3/16 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 74A116C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/4 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 74A120C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 5/16 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 74A124C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 3/8 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 74A132C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/2 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 75A108C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/8 in Dia Cutter, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 75A112C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 3/16 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 75A116C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/4 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 75A120C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 5/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 75A124C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 3/8 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 75A132C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/2 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
MORSE® 43261 1895 Double End Non-Center Cutting Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 43261 1895 Double End Non-Center Cutting Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 43262 1895 Double End Non-Center Cutting Regular Length End Mill, 3/32 in Dia Cutter, 9/32 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 43262 1895 Double End Non-Center Cutting Regular Length End Mill, 3/32 in Dia Cutter, 9/32 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 43266 1895 Double End Non-Center Cutting Regular Length End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Bright
MORSE® 43266 1895 Double End Non-Center Cutting Regular Length End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Bright
MORSE® 43268 1895 Double End Non-Center Cutting Regular Length End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
MORSE® 43268 1895 Double End Non-Center Cutting Regular Length End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
MORSE® 43269 1895 Double End Non-Center Cutting Regular Length End Mill, 7/32 in Dia Cutter, 9/16 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
MORSE® 43269 1895 Double End Non-Center Cutting Regular Length End Mill, 7/32 in Dia Cutter, 9/16 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
MORSE® 43270 1895 Double End Non-Center Cutting Regular Length End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-3/8 in OAL, Bright
MORSE® 43270 1895 Double End Non-Center Cutting Regular Length End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-3/8 in OAL, Bright
MORSE® 43271 1895 Double End Non-Center Cutting Regular Length End Mill, 9/32 in Dia Cutter, 11/16 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-3/8 in OAL, Bright
MORSE® 43271 1895 Double End Non-Center Cutting Regular Length End Mill, 9/32 in Dia Cutter, 11/16 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-3/8 in OAL, Bright
MORSE® 43272 1895 Double End Non-Center Cutting Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 43272 1895 Double End Non-Center Cutting Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 43274 1895 Double End Non-Center Cutting Regular Length End Mill, 3/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 43274 1895 Double End Non-Center Cutting Regular Length End Mill, 3/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
Recently Viewed
Crosby® 1014226 S-340-1 3/8 Pear Shaped Weldless End Link, 1-3/8 in Trade, 30000 lb Load, Forged Carbon Steel, Self-Colored
Crosby® 1014226 S-340 Pear Shaped Weldless End Link, 1-3/8 in Trade, 30000 lb Load, Forged Carbon Steel, Self-Colored
8" X 3/4" X 1-1/4" GRINDING WHEEL-CRB09827 >
Williams® JHW7039B SUPERTORQUE® Double Headed Box End Wrench, 1-1/4 x 1-5/16 in Wrench, 12 Points, 10 deg Offset, 17-5/8 in OAL, Satin Chrome
Williams® JHW7039B SUPERTORQUE® Double Headed Box End Wrench, 1-1/4 x 1-5/16 in Wrench, 12 Points, 10 deg Offset, 17-5/8 in OAL, Satin Chrome
OXY-ACETYLENE CUTTING TIP, SIZE #0 MEDIUM DUTY HARRIS COMPATIBLE
RECIPROCATING SAW BLADE FOR STEEL--PACK OF 5-MAK7925409 >
Channellock® 410 Double Tongue and Groove Plier, 1.12 in Nominal, 1.12 in L x 0.44 in THK C1080 High Carbon Steel Straight Jaw, 9-1/2 in OAL
The special parrot nose design gives the NUTBUSTER® added strength that is ideal for round surfaces. This Plier is built to last with a PermaLock® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and right angle, laser heat treated teeth to provide a better, longer lasting grip.
