Drillco 74A120C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 5/16 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
-
BrandDrillco
-
UPC045997391212
-
Manufacturer Part Number74A120C
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialSolid Carbide
-
Flute TypeSpiral
-
TypeCenter Cutting Double End Imperial Stub Length
-
Helix Angle30 deg
-
Series7400
-
Cutter Diameter5/16 in
-
Shank Diameter5/16 in
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Shank TypeRound
-
Length of Cut1/2 in
-
Overall Length2-1/2 in
- Solid carbide construction for extreme rigidity and strength
- Solid carbide can be ran at 3x the speed and feed of HSS
- Center cutting tip for plunging, pocketing and holemaking
- 2 flutes provide more efficient chip removal
- Bright finish for added lubricity
- Stub length for added rigidity
- Double ended for 2x the life
-
UNSPSC27112803
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
-
SDS
-
Catalog
Recently Viewed
Drillco 74A120C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 5/16 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Knipex® Cobra® 87 21 250 SBA High-Tech Water Pump Plier, DIN ISO 8976, 2 in Round Pipe, 1-3/4 in Hex Nut Nominal, 1-19/64 in L x 19/64 in W V-Jaw Jaw, Knurled Jaw Surface, 10 in OAL
The Cobra® QuickSet combines all proven properties of the Knipex® Cobra® with an additional push on function which makes it easier to work in very confined and inaccessible areas. Adjustment directly on the workpiece is possible by simply sliding the pliers handle. The hinge bolt locks itself with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button. The hinge bolt must be released by pressing the button and the pliers must be completely opened once to activate the QuickSet function again.
Chicago Pneumatic CP-9429 Ratchet Wrench, 3/8 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
THE SPOT SHOT INSTANT CARPET STAIN REMOVER IS FORMULATED TO TACKLE THE TOUGHEST CARPET STAINS WITH EASE. THIS HIGH-PERFORMANCE AEROSOL CLEANER USES A UNIQUE FORMULA TO INSTANTLY REMOVE BOTH OIL-BASED AND WATER-BASED STAINS, INCLUDING PET STAINS, COFFEE, WINE, GREASE, INK, AND MORE
JWH626384 >
Carlon® E940L Non-Metallic Standard Conduit Coupling, 3 in, For Use With SCH 40 and SCH 80 Conduit, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
