Browning COUPLINGS--USE "IDC" L-190 X 104-K
TB Wood's® L190114 Straight L-Jaw Coupling Hub, L190 Coupling, 1-1/4 in Bore, 1.94 in, 4 in Hub, Cast Iron
-
BrandTB Wood's®
-
UPC698672111164
-
Manufacturer Part NumberL190114
-
CountryUSA
-
MaterialCast Iron
-
Maximum Speed5000 rpm
-
Screw Size7/16-14 UNC-2B x 5/8 in L
-
Coupling SizeL190
-
Hub Diameter4 in
-
Hub Length4.88 in
-
Keyway Size1/4 x 1/8 in
-
Length Through Bore1.94 in
-
Bore Diameter1-1/4 in
-
UNSPSC31163000
-
Standards/ApprovalsPROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
TB Wood's® L190114 Straight L-Jaw Coupling Hub, L190 Coupling, 1-1/4 in Bore, 1.94 in, 4 in Hub, Cast Iron
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Proto® TorquePlus™ J1206MES Combination Wrench, 6 mm Wrench, 12 Points, 15 deg Offset, 3-1/4 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
HARDWOOD POLE SANDER POLE - JWH313750 >
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
4-1/2" X 1/8" X 7/8" CUTOFF WHEEL, METAL TYPE 1 WITH 7/8" ARBOR-FOR71849 >
