Square D™ QO™ B200 Type B Hub, 2 in, For Use With Loadcenter, Safety Switch and RB Device
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 2 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
-
BrandSquare D™
-
UPC785901459477
-
Manufacturer Part NumberB200
-
CountryUSA
-
TypeType B
-
Dimensions3.09 mm L x 4.44 mm W x 1.38 mm H
-
Size2 in
-
Suitable For Use WithLoadcenter, Safety Switch and RB Device
- Industrial circuit breaker enclosure that easily joins hub to conduit
- Rainproof construction for tough and reliable performance
- Off center conduit thread openings
- Easy plug on design with SE Homeline Loadcenters requires only two spaces
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1H305 |
-
Alternative Part Number8055307
-
UNSPSC39121601
-
IDEA Index ID8055307
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|RoHS Compliant|ANSI Specified|NEMA|UL Listed|CSA Certified|PROP65: Cancer and Reproductive harm - www.P65warnings.ca.gov
-
Warranty18 months
-
RoHS
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
-
Owners/User Manual
Recently Viewed
Square D™ QO™ B200 Type B Hub, 2 in, For Use With Loadcenter, Safety Switch and RB Device
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 2 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
TOUCHLESS PAPER TOWEL DISPENSER - WHYSANT1460TBK>
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
HCI Preferred Supplier 73952 Hose Nipple, 3/8 in Nominal, Barb x MIP, ASTM A-351 Cast Stainless Steel
HCI Preferred Supplier 32013SS Rigid Hose-to-Pipe Adapter, 3/8 in Nominal, Barb x MIP End Style, 316 Stainless Steel
Dixon® PP-DP-50 Type DP Cam & Groove Dust Plug, 1/2 in Nominal, Polypropylene
Dixon® PP-DP-50 Type DP Cam & Groove Dust Plug, 1/2 in Nominal, Polypropylene
