Conduit Hubs
Square D™ QO™ B200 Type B Hub, 2 in, For Use With Loadcenter, Safety Switch and RB Device
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 2 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
Watertight hubs securely connect Rigid or IMC conduits to standard knockouts in boxes or electrical enclosures Topaz's corrosion resistant zinc die cast construction prevents moisture, dust and other damaging particles entering conduit. Oversized locknut prevents damage from vibrations. UL listed, NEMA 2, 3R, 4, 4X, 5, 12, 13 approved; 1/2” to 4” sizes to suit multiple applications are always in stock.
Appleton® NEER™ HUBG50DN Grounding Watertight Conduit Hub, 1/2 in, For Use With IMC/Rigid Conduit, Die Cast Zinc
Appleton® zinc diecast hubs for use in wet or dry locations, indoors or outdoors. They are used to connect rigid metal conduit or IMC conduit to a threadless opening in an enclosure. The smooth, accurately machined NPT threads facilitate flawless installation.
Appleton® NEER™ HUB75DN Watertight Conduit Hub, 3/4 in, For Use With IMC/Rigid Conduit, Die Cast Zinc
Appleton® zinc diecast hubs for use in wet or dry locations, indoors or outdoors. They are used to connect rigid metal conduit or IMC conduit to a threadless opening in an enclosure. The smooth, accurately machined NPT threads facilitate flawless installation.
Appleton® NEER™ HUB50DN Watertight Conduit Hub, 1/2 in, For Use With IMC/Rigid Conduit, Die Cast Zinc
Appleton® zinc diecast hubs for use in wet or dry locations, indoors or outdoors. They are used to connect rigid metal conduit or IMC conduit to a threadless opening in an enclosure. The smooth, accurately machined NPT threads facilitate flawless installation.
Appleton® NEER™ HUB300DN Watertight Conduit Hub, 3 in, For Use With IMC/Rigid Conduit, Die Cast Zinc
Appleton® zinc diecast hubs for use in wet or dry locations, indoors or outdoors. They are used to connect rigid metal conduit or IMC conduit to a threadless opening in an enclosure. The smooth, accurately machined NPT threads facilitate flawless installation.
Appleton® HUB200D Conduit Hub, 2 in, For Use With IMC/Rigid Metal Conduit, Die Cast Zinc
Appleton® HUB200D Conduit Hub, 2 in, For Use With IMC/Rigid Metal Conduit, Die Cast Zinc
Recently Viewed
ITM TX02515 Bit Screwdriver, #T15 Point, 1 in OAL
metabo® 676412000 4-Cutter Hammer Drill Bit, 1-3/8 in Drill Bit, Spline Shank, 17 in D Cutting, Carbide Cutting Edge, 22 in OAL
metabo® 676412000 4-Cutter Hammer Drill Bit, 1-3/8 in Drill Bit, Spline Shank, 17 in D Cutting, Carbide Cutting Edge, 22 in OAL
Leviton® 5372-S00 Grounding Straight Blade Receptacle, 250 V AC, 30 A, 2 Poles, 3 Wires, Black
Built of durable thermoplastic, Leviton® power receptacles come equipped with heavy gauge, double wire copper alloy contacts. Flush mount receptacles fit Leviton® wide range of 2.15 in Dia wallplates and mounting hardware is included.
HCI Preferred Supplier 46003 Needle Valve, 1/4 in, Compression x Male, Brass Body
HCI Preferred Supplier 46003 Needle Valve, 1/4 in, Compression x Male, Brass Body
Browning 12-TOOTH P-BUSH #80 CHAIN SPROCKET BRW H-80-P-12
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Milwaukee® 5340-21 Dual Mode Corded Rotary Hammer Kit, 2 in Keyed/Spline Chuck, 975 to 1950 bpm, 125 to 250 rpm No-Load, 6 in Max Core Bit Compatibility, 2 in Max Solid Bit Capacity, 27-1/2 in OAL
Perform a variety of digging and drilling jobs on floors or the ground with this heavy duty INLINE™ design. The 2 in spline drive rotary hammer delivers 19.9 ft-lb of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The INLINE™ design offers more comfortable operation and the soft-grip side-handle can be attached in three positions - including the rear switch handle - to minimize bending. A system of anti-vibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable speed dial for optimum control and a service reminder light the tool uses standard spline and round/hex accessories and comes with a carrying case.
