Dykem 12-OZ-SPRAY LAY/FLUID REMOVER/PREP DYK 82038
Dykem® 82038 Layout Fluid Remover/Prepares, 16 oz Aerosol Can, Clear, Aerosol Can Form
-
BrandDykem®
-
UPC753769820388
-
Manufacturer Part Number82038
-
CountryUSA
-
FormAerosol Can
-
ColorClear
-
CompositionAcetone, Ethanol, Butane, n-Propyl Acetate, Isopropyl Alcohol
-
VOC Content1
-
Container Size16 oz
-
Container TypeAerosol Can
-
Net Weight12 oz
-
Specific Gravity<1
- Prepares surfaces for better adhesion of layout fluids and removes layout fluids when project is complete
- Prepares metal surfaces
- Dries in minutes
- Does not contain toluene or chlorinated solvents
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | LL6082038 |
-
UNSPSC23153504
-
Package Description12/CS
-
Specification Sheet
Recently Viewed
Dykem® 82038 Layout Fluid Remover/Prepares, 16 oz Aerosol Can, Clear, Aerosol Can Form
QUICK AND EASY ASSEMBLY. POSITIVE SEALS, EASY ON/OFF HOSE CONNECTIONS, 360 DEGREE ORIENTATION MAXIMUM PRESSURE IS 150 PSI
- BAJM100MPT >
10-MM-PITCH X 1940-MM TIMING BELT - JAS32AT10/1940>
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
JASON 4RB133 V-BELTS, TOP WIDTH .066" 21/32"4-RIBS 136" OUTSIDE LENGTH
THIS V-BELT IS OIL AND HEAT-RESISTANT. STATIC DISSIPATING. UNIMATCH BANDED V-BELTS ARE AVAILABLE IN CLASSICAL MULTIPLE SECTIONS. THEY FEATURE THE SAME PREMIUM CONSTRUCTIONS AS THE INDIVIDUAL BELT AND ARE BONDED.
-JAS4RB133 >
3/8" X 1/4" COPPER SWEAT REDUCERS-ELK1183/8X1/4>
