BANJO M-100-MPT 1" FLANGE x 1" MALE THREAD WITH 300 MAX PSI
QUICK AND EASY ASSEMBLY. POSITIVE SEALS, EASY ON/OFF HOSE CONNECTIONS, 360 DEGREE ORIENTATION MAXIMUM PRESSURE IS 150 PSI
- BAJM100MPT >
Recently Viewed
QUICK AND EASY ASSEMBLY. POSITIVE SEALS, EASY ON/OFF HOSE CONNECTIONS, 360 DEGREE ORIENTATION MAXIMUM PRESSURE IS 150 PSI
- BAJM100MPT >
10-MM-PITCH X 1940-MM TIMING BELT - JAS32AT10/1940>
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
JASON 4RB133 V-BELTS, TOP WIDTH .066" 21/32"4-RIBS 136" OUTSIDE LENGTH
THIS V-BELT IS OIL AND HEAT-RESISTANT. STATIC DISSIPATING. UNIMATCH BANDED V-BELTS ARE AVAILABLE IN CLASSICAL MULTIPLE SECTIONS. THEY FEATURE THE SAME PREMIUM CONSTRUCTIONS AS THE INDIVIDUAL BELT AND ARE BONDED.
-JAS4RB133 >
3/8" X 1/4" COPPER SWEAT REDUCERS-ELK1183/8X1/4>
Browning® 3749074 Taper Lock Bushing, 13/16 in Dia Bore, 2-1/4 in Dia Barrel, 1-1/2 in OAL, Steel
Browning® 3749074 Taper Lock Bushing, 13/16 in Dia Bore, 2-1/4 in Dia Barrel, 1-1/2 in OAL, Steel
