GLUE
579718 DO-IT-BEST/PERMATEX REARVIEW MIRROR ADHESIVE
PERMATEX REARVIEW MIRROR ADHESIVE. APPROVED AND USED BY GM, FORD, AND CHRYSLER. PERMANENTLY REMOUNTS MIRRORS TO WINDSHIELDS. ACHIEVES HANDLING STRENGTH IN SECONDS; MIRROR-MOUNTING STRENTH IN 15 MINUTES.
-JWH579718 >
615412 DO-IT-BEST/GOO GONE 8-OZ ADHESIVE REMOVER
GOO AND ADHESIVE REMOVER ELIMINATES THE ROUGHEST CLEANING PROBLEMS. GOO GONE CLEANS GREASE, TAR, BLOOD, CHEWING GUM, SOAP SCUM, BUMPER STICKERS AND MORE. CAN BE USED ON CARPET, HAIR, CLOTHING, AUTOS, BOATS, FIBERGLASS, AND MANY OTHER GOOEY AND STICKY MESSES. INGREDIENTS; PETROLEUM, ETHER AND CITRUS EXTRACTS
JWH615412 >
630969 DO-IT-BEST/GOO GONE 1 GAL. PRO-POWER ADHESIVE REMOVER
SURFACE SAFE AND FAST WORKING REMOVER. USE ON HARD NON-POROUS SURFACES OR SOFT FABRIC SURFACES. INGREDIENTS: PETROLEUM, ETHER AND CITRUS EXTRACTS.
-JWH630969 >
89445 3M COMPANY
3M HOT MELT APPLICATOR TC WITH QUADRACK CONVERTER AND PALM TRIGGER - MMM89445 >
GF-15-12-11-LB DO-IT BEST 1/2" X 12" GLUE STICKS--BX/11-LBS
1/2" X 12" GLUE STICKS--BX/11-LBS-JWHCF151211LB>
Recently Viewed
3-TINE FORGED CULTIVATORS-UNI68131 >
WATTS® 0372271 530 Calibrated Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 300 psi Pressure, Brass Body
This 3/4 inch calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil, or air. It consists of a bronze body construction with 3/4 inch NPT threaded male inlet and 1/2 inch NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series 530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for bypass thermal expansion pressure relief (not ASME approved). It is for use in fire protection systems. The maximum pressure is300 psi (20.67 bar). The adjustable pressure range is 50 to 175 psi (3.45 to 12.06 bar).
Dichtomatik 75102160 O-Ring, 238 Dash Number, 3.484 in ID x 3.762 in OD, FKM, 75 Shore A Durometer, Import, Custom 238-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik 75102381 O-Ring, 912 Dash Number, 0.924 in ID x 1.156 in OD, FKM, 75 Shore A Durometer, Import, Custom 912-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik 75102143 O-Ring, 221 Dash Number, 1.421 in ID x 1.699 in OD, FKM, 75 Shore A Durometer, Import, Custom 221-viton
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik 75102007 O-Ring, 012 Dash Number, 0.364 in ID x 0.504 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
