Martin 40BS12 1 Bored-to-Size Type BS Single Pitch Roller Chain Sprocket With Keyway, 1 in Dia Bore, 2.166 in OD, #40 Chain, 12 Teeth, 1/2 in Pitch, Steel
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
-
BrandMartin
-
UPC697950003740
-
Manufacturer Part Number40BS12 1
-
CountryUSA|Canada
-
Pitch1/2 in
-
Pitch Diameter1.932 in
-
MaterialSteel
-
Chain Size#40
-
TypeBored-to-Size Type BS
-
Screw Size1/4-20 x 1/4 in
-
Hub Diameter1.593 in
-
Number of Teeth12
-
Keyway Size1/4 x 1/8 in
-
Outside Diameter2.166 in
-
Length Through Bore7/8 in
-
Bore Diameter1 in
- Keyway is on center line of tooth
- Stock finished bores
- Non-hardened teeth
- Precise machining and processes ensure consistent finish and high quality
- Bores are concentric to pitch line, minimizing run out
- 2 set screws keyed on centerline of tooth
-
UNSPSC31171901
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
Martin 40BS12 1 Bored-to-Size Type BS Single Pitch Roller Chain Sprocket With Keyway, 1 in Dia Bore, 2.166 in OD, #40 Chain, 12 Teeth, 1/2 in Pitch, Steel
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
1/4" X 4" #2 PHILLIPS SCREWDRIVER-ARS66156 >
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
Weller® Marksman® MTG20 MTG Conical Micro Soldering Tip, For Use With SPG80 and WLC200 Soldering Irons, 44.45 mm L x 9.53 mm W x 9.53 mm THK, Copper, Nickel/TiN Plated
Weller® Marksman® MTG20 MTG Conical Micro Soldering Tip, For Use With SPG80 and WLC200 Soldering Irons, 44.45 mm L x 9.53 mm W x 9.53 mm THK, Copper, Nickel/TiN Plated
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 2 pole QO circuit breaker is rated at 70A at 120/240VAC. This unit provides 10kA breaking capacity and bolt on mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
