Browning 3-1/2"-ID QD F-STYLE BUSHINGS BRW F-3-1/2
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672702935
-
Manufacturer Part NumberF312
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter6-5/8 in
-
Flange Thickness13/16 in
-
Torque Rating40000 in-lb
-
TypeStandard
-
Screw Size9/16-12 x 3-5/8 in
-
Number of Bolt Holes3
-
Barrel Diameter7/16 in
-
Keyway Size7/8 x 3/16 in
-
Bolt Circle Diameter5-5/8 in
-
Bore Diameter3-1/2 in
-
Overall Length3.63 in
- Size F bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
MORSE® 44568 4581 Center Cutting Double End Regular Length End Mill, 3/8 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
Dichtomatik 75102029 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1/2-BSTE 1/2" Black 90-degree Street Elbow
1/2" BLACK 90-DEGREE STREET ELBOW - JPW1/2BSTE >
Crosby® 1032536 HG-228-3/8 X 6,Turnbuckle, Jaw/Jaw, 3/8 in Thread, 1200 lb Working, 6 in Take Up, 11-1/2 in L Close, Steel
Crosby® 1032536 HG-228 Turnbuckle, Jaw/Jaw, 3/8 in Thread, 1200 lb Working, 6 in Take Up, 11-1/2 in L Close, Steel
FHP V-BELTS-JAS4L930>
