Dichtomatik 75102029 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part Number75102029
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialFKM
-
ColorBlack
-
Inside Diameter2.114 in
-
Domestic/ImportImport
-
Durometer75 Shore A
-
Outside Diameter2.254 in
- Good chemical resistance to mineral oils and greases, synthetic oils and greases, motor, transmission and ATF oils up to 150 deg C
- Very good weathering, ozone and aging resistance
- Very low gas permeability
-
UNSPSC31401503
-
Standards/ApprovalsASTM D1418|AS 568B|BS 1806|JIS 2401
-
Alternative Part NumberV75034
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dichtomatik 75102029 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
6" STEEL RULERS-STRC305R6 >
Coilhose® N12-25B Coiled Air Hose, 1/2 in Nominal, 1/2 in MPT Swivel End Style, 25 ft L, 170 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N12-25B Coiled Air Hose, 1/2 in Nominal, 1/2 in MPT Swivel End Style, 25 ft L, 170 psi at 70 deg F Working, Nylon, Domestic
3/4" DIAMETERX2" SHOULDER BOLT-HOL08130 >
5/8" DIAMETERX5" SHOULDER BOLT-HOL08124 >
