Crosby® 1032536 HG-228-3/8 X 6,Turnbuckle, Jaw/Jaw, 3/8 in Thread, 1200 lb Working, 6 in Take Up, 11-1/2 in L Close, Steel
Crosby® 1032536 HG-228 Turnbuckle, Jaw/Jaw, 3/8 in Thread, 1200 lb Working, 6 in Take Up, 11-1/2 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1032536
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter3/8 in
-
MaterialSteel
-
Closed Length11-1/2 in
-
SeriesHG-228
-
Working Load1200 lb
-
End/EndJaw/Jaw
-
Take Up6 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Forged jaw ends are fitted with bolts and nuts for 1/4 in through 5/8 in and pins and cotters on 3/4 in through 2-3/4 in sizes
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 7|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1032536 HG-228-3/8 X 6,Turnbuckle, Jaw/Jaw, 3/8 in Thread, 1200 lb Working, 6 in Take Up, 11-1/2 in L Close, Steel
Crosby® 1032536 HG-228 Turnbuckle, Jaw/Jaw, 3/8 in Thread, 1200 lb Working, 6 in Take Up, 11-1/2 in L Close, Steel
METRIC NOTCHED V-BELT-JASXPB2360 >
Dichtomatik 75102029 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
6" STEEL RULERS-STRC305R6 >
Coilhose® N12-25B Coiled Air Hose, 1/2 in Nominal, 1/2 in MPT Swivel End Style, 25 ft L, 170 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N12-25B Coiled Air Hose, 1/2 in Nominal, 1/2 in MPT Swivel End Style, 25 ft L, 170 psi at 70 deg F Working, Nylon, Domestic
