Browning® 1073055 Weld-On Hub, 1.621 in Dia Bore, 2-1/2 in OD, 2 in Dia Bolt Circle, 5/8 in OAL, Steel
Browning® 1073055 Weld-On Hub, 1.621 in Dia Bore, 2-1/2 in OD, 2 in Dia Bolt Circle, 5/8 in OAL, Steel
-
BrandBrowning®
-
UPC662289164820
-
Manufacturer Part Number1073055
-
CountryUSA
-
MaterialSteel
-
Number of Bolt Holes2
-
Bolt Circle Diameter2 in
-
Outside Diameter2-1/2 in
-
Bore Diameter1.621 in
-
Overall Length5/8 in
-
Pilot Diameter2-3/8 in
- Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
-
Alternative Part NumberHCH1 HUB
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Warranty Information
Recently Viewed
Browning® 1073055 Weld-On Hub, 1.621 in Dia Bore, 2-1/2 in OD, 2 in Dia Bolt Circle, 5/8 in OAL, Steel
Browning® 1073055 Weld-On Hub, 1.621 in Dia Bore, 2-1/2 in OD, 2 in Dia Bolt Circle, 5/8 in OAL, Steel
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
BearKat® BK1 Series Lightweight and Comfortable Soft Non-Slip Temple Material Wrap around frameless lens design provides an unobstructed view The BearKat® BK1's well-thought-out construction combines the best in safety, comfort, and affordability! Your vision is unobstructed by the one-piece wraparound lens, which, by its secure fit, provides maximum safety. Comfort is enhanced by the flexible temples, and the non-slip temple sleeves are notched for a clip-on breakaway cord. If you are looking for the best safety glasses, look no further than MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
SANDING BELTS-SAI57402>
Mayhew™ 21401 PRO™ Pin Punch, 1/2 in Hex Punch, 10 in OAL, Alloy Steel
Dichtomatik N70115 O-Ring, 115 Dash Number, 0.674 in ID x 0.88 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
