Mayhew PIN PUNCH 1/2" TIP 3/4 X 10" MAY 21401
Mayhew™ 21401 PRO™ Pin Punch, 1/2 in Hex Punch, 10 in OAL, Alloy Steel
-
BrandMayhew™
-
UPC045256214016
-
Manufacturer Part Number21401
-
CountryUSA
-
MaterialAlloy Steel
-
Punch Size1/2 in
-
Punch TypeHex
-
ColorBlack Oxide
-
SeriesPRO™
-
Overall Length10 in
- Used to drive out and remove already loosened pins and keys after initial movement by a solid punch
- Not for use on seized pins and keys, loosen with a solid punch first
- Available in black oxide finish for additional rust protection
-
UNSPSC27111500
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Mayhew™ 21401 PRO™ Pin Punch, 1/2 in Hex Punch, 10 in OAL, Alloy Steel
Dichtomatik N70115 O-Ring, 115 Dash Number, 0.674 in ID x 0.88 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® 767427 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 2-3/16 in Dia Bore, 3.937 in OD, 2-3/16 in W, 9752 lb Dynamic/6601 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Weiler® 14606 Non-Sparking Cup Brush, 5 in Dia Brush, 5/8-11 Arbor Hole, 0.014 in Dia Filament/Wire, Crimped, Brass Fill
Weiler® 14606 Non-Sparking Cup Brush, 5 in Dia Brush, 5/8-11 UNC Arbor Hole, 0.014 in Dia Filament/Wire, Crimped, Brass Fill
23 TOOTH SPROCKETS FOR #35 CHAIN-BRWH3523X5/8 >
