Multiple Groove Sheaves
TB Wood's® Sure-Grip® 1203C Type B Webbed Classical V-Belt Sheave, 7/8 to 3-1/2 in QD® Bore, 12.4 in OD, 3 Grooves, 12.4 in Dia Pitch, 3-3/8 in W Face
TB Wood's® sheaves are constructed of fine grain, high tensile cast iron, and have been carefully engineered to assure maximum performance over a long life span. Behind each sheave is one of the most extensive engineering design and testing programs in the industry. With the advent of higher V-belt ratings, TB Wood's® engineers instituted additional careful test programs to ensure that each Wood's sheave would be capable of safely and dependably delivering the increased performance which was required by the new ratings. TB Wood's® engineers, using a special strain gage test stand, subject sheaves to tension and compression stresses far in excess of those encountered in actual operation.
MasterDrive 6B94SF Type A-2 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 9.75 in Dia Outside, 6 Grooves, 9 in (A)/9.4 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B80SF Type A-2 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 8.35 in Dia Outside, 6 Grooves, 7.6 in (A)/8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B70SF Type A-1 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 7.35 in Dia Outside, 6 Grooves, 6.6 in (A)/7 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B68SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 7.15 in Dia Outside, 6 Grooves, 6.4 in (A)/6.8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B66SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.95 in Dia Outside, 6 Grooves, 6.2 in (A)/6.6 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B64SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.75 in Dia Outside, 6 Grooves, 6 in (A)/6.4 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6B58SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.15 in Dia Outside, 6 Grooves, 5.4 in (A)/5.8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 6/5V850E Type A-1 Groove Sheave, 7/8 to 3-1/2 in Dia Bore QD Bushed Bore, 8.5 in Dia Outside, 6 Grooves, 8.4 in Dia Pitch, 4.43 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 5/3V600SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6 in Dia Outside, 5 Grooves, 5.95 in Dia Pitch, 2.312 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive 4/5V975E Type B-2 Groove Sheave, 7/8 to 3-1/2 in Dia Bore, 9.75 in Dia Outside, 4 Grooves, 9.65 in Dia Pitch, 3.062 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
Martin Hi-Cap® 8 3V 530 SK Solid Type A-1 Wedge Stock Sheave, 1/2 to 2-5/8 in QD® Bushed Bore, 5.3 in OD, 8 Grooves, 5-1/4 in Dia Pitch, 3.531 in W Face
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
Martin Hi-Cap® 5 5V 750 TB Solid Type A-1 Wedge Stock Sheave, 15/16 to 2-3/4 in TB Bushed Bore, 7-1/2 in OD, 5 Grooves, 7.4 in Dia Pitch, 3-3/4 in W Face
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V and 8V belts.
Martin Hi-Cap® 4 5V 670 SK Solid Type A-1 Wedge Stock Sheave, 1/2 to 2-5/8 in QD® Bushed Bore, 6.7 in OD, 4 Grooves, 6.6 in Dia Pitch, 3.063 in W Face
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
IDC Select® IDC 2/3V0800SDS Heavy Duty Type D-3 Arm/Spoke Sheave, QD® Bore, 8 in OD, 2 Grooves, 7.95 in Dia Pitch, 1-3/32 in W Face
IDC Select® classical A/B combination, C and D sheaves, and narrow 3V, 5V, and 8V sheaves are available in QD® bushing designs. They are precision machined from 30 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
Gates® Power Transmission Super HC® QD9/5V13.20 Heavy Duty Multiple Groove Sheave, 3-15/16 in QD® Bore, 13.2 in OD, 9 Grooves, 6-1/2 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HC® and Super HC PowerBand® belts.
Gates® Power Transmission Super HC® QD5/5V8.50 Heavy Duty Multiple Groove Sheave, 7/8 to 3-1/2 in QD® Bore, 8-1/2 in OD, 5 Grooves, 8.4 in Dia Pitch, 3-3/4 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HC® and Super HC PowerBand® belts.
Gates® Power Transmission Super HC® QD5/5V7.10 Heavy Duty Multiple Groove Sheave, 1/2 to 2-15/16 in QD® Bore, 7.1 in OD, 5 Grooves, 7 in Dia Pitch, 3-3/4 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HC® and Super HC PowerBand® belts.
Gates® Power Transmission QD2A7.0/B7.4 Heavy Duty Multi-Duty Sheave, 1/2 to 2-1/2 in QD® Bore, 7-3/4 in OD, 2 Grooves, 7 in (A)/7.4 in (B) Dia Pitch, 1-3/4 in W Face
From heavy-duty sheaves built to haul your heavy loads to light-duty sheaves designed for your vehicle’s drive system, and multi-duty sheaves for every application in between, Gates designs a wide range of versatile, high performance sheaves to keep your belt drive system running smooth. Each sheave is precision manufactured to ensure the perfect fit, and can be completely customized to your belt system with Gates Made-To-Order metals.
Dodge® 455935 Block Heavy Duty Type A Sheave, 1-1/2 to 4-1/2 in QD® Bore, 12.4 in OD, 12 Grooves, 12.4 in Dia Pitch, 12.37 in W Face
Dodge® branded sheaves come in two bushing styles, QD and Taper Lock®. In addition to these bushing choices, Dodge® now offers choices within our QD sheaves line. Our QD sheave line comes in a standard duty and a heavy duty offering.
Dodge® 118235 Type A1 Sheave, 1/2 to 1-11/16 in Taper-Lock® Bore, 4.95 in OD, 3 Grooves, 4.58/4.96 in Dia Pitch, 2-1/2 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
Dodge® 118220 Type A1 Sheave, 1/2 to 1-11/16 in Taper-Lock® Bore, 5.55 in OD, 2 Grooves, 5.18/5.56 in Dia Pitch, 1-3/4 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
Dodge® 118211 Type A1 Sheave, 1/2 to 1-1/4 in Taper-Lock® Bore, 3-3/4 in OD, 2 Grooves, 3.38/3.76 in Dia Pitch, 1-3/4 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
Dodge® 118136 Type A1 Sheave, 1/2 to 2-11/16 in Taper-Lock® Bore, 5-3/4 in OD, 6 Grooves, 5.38 in (A)/5.76 in (B) Dia Pitch, 4-3/4 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
Recently Viewed
JET® JT9-505100 R6 Butterfly Impact Wrench, 3/8 in Drive, 5 to 50 ft-lb Working/ 75 ft-lb Maximum Torque, 3 cfm Air Flow, 5-7/8 in OAL
Durable quality tools that can withstand frequent and rigorous applications, the R6 series can handle 6 hour workdays and get the job done.
3/4"-DR 1350-FT/LB AIR IMPACT WRENCH - ING2141>
DeWALT® Power-Stud® 7315 Wedge Expansion Anchor, 3/8 in Dia, 3-3/4 in OAL, 2-5/8 in L Thread, 304 Stainless Steel, Galvanized
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
Chicago Pneumatic 6151952105 Die Grinder, 1/4 in Collet, 0.32 hp, 4.3 to 8.692 cfm Air Flow, 28000 rpm Speed
The CP876 series is designed for general maintenance in limited spaces applications. It has an integrated pneumatic regulator with a power of 0.3 HP (220 W). It is a very compact and lightweight tool, ensuring extreme maneuverability in high-speed grinding applications.
Ingersoll-Rand 2115TIMAX Impact Wrench, 3/8 in Drive, 339 Nm Forward, 407 Nm Reverse Torque Rating, 17 cfm Full Load/4 cfm Average Air Flow, 5.95 in OAL
The 2115TiMAX delivers best in class performance for a tool less than six inches long and weighing less than two and a half pounds. The minimal size of this tool will allow greater access to tight spaces, while the minimal weight will reduce operator fatigue...all while still delivering MAX performance.
Westinghouse 0406700 Dimmable Specialty Incandescent Lamp, 7.5 W, E26 Incandescent Lamp, S11 Shape
Incandescent lamps represent the original lighting technology, remaining virtually unchanged since their invention in the mid-19th century, and the lighting technology Satco was founded upon. This is the technology most everyone has become familiar with and the baseline comparison for all other lighting technologies. As the incandescent bulb becomes more and more regulated, Satco remains on the cutting edge of new lighting technologies. Still, we remain well-stocked with incandescent lamps in a multitude of wattages, base sizes, and shapes for every application.
