Gates® Power Transmission Poly Chain® GT®2 14MX-33S-37 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.68 in OD, 33 Grooves, 5.79 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC072053272048
-
Manufacturer Part Number14MX-33S-37
-
CountryUSA|Canada
-
Face Width2.06 in
-
Bushing Type2517
-
Pitch14 mm
-
Pitch Diameter5.79 in
-
MaterialCast Iron
-
Flange Diameter6.46 in
-
Series7719
-
Hub Diameter4.53 in
-
Number of Grooves33
-
Outside Diameter5.68 in
-
Bore Diameter1/2 to 2-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With37 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77193033
-
UNSPSC31171900
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 14MX-33S-37 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.68 in OD, 33 Grooves, 5.79 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission Poly Chain® GT®2 14MX-40S-37 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 6.91 in OD, 40 Grooves, 7.018 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
2" X 120" 1-PLY FLAT-EYE NYLON SLING - SWC21013 >
Electrical Outlet Strips
1.156" X 2.066" X .375" OIL SEAL-NAT473427>
Gates CX-112 Tri-Power® Industrial V-Belts - CX Section, 7/8 in Top Width, 1 Strand, 116.0000 in Nominal Outside Length, Cogged
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
