Gates® Power Transmission Poly Chain® GT®2 14MX-40S-37 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 6.91 in OD, 40 Grooves, 7.018 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053272116
-
Manufacturer Part Number14MX-40S-37
-
CountryUSA|Canada
-
Face Width2.06 in
-
Bushing Type3020
-
Pitch14 mm
-
Pitch Diameter7.018 in
-
MaterialCast Iron
-
Flange Diameter7.52 in
-
Series7719
-
Hub Diameter5.54 in
-
Number of Grooves40
-
Outside Diameter6.91 in
-
Bore Diameter7/8 to 3-1/4 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With37 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77193040
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 14MX-40S-37 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 6.91 in OD, 40 Grooves, 7.018 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission Poly Chain® GT®2 14MX-30S-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.15 in OD, 30 Grooves, 5.263 in Dia Pitch, 1.36 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Morse® 465702 TL Series Torque Limiter, 5/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Gates® Power Transmission Poly Chain® GT®2 14MX-31S-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.33 in OD, 31 Grooves, 5.439 in Dia Pitch, 1.36 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Morse® 194625 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 160.53 mm OD
Morse® 465704 TL Series Torque Limiter, 7/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
