Gates® Power Transmission Metric-Power™ XPZ2120 Heavy Duty Molded Notch V-Belt, XPZ Section, 10 mm W Top, 2123 mm L Outside, 8 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
-
BrandGates® Power Transmission
-
UPC072053693133
-
Manufacturer Part NumberXPZ2120
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness8 mm
-
MaterialEPDM
-
Top Width10 mm
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Section SizeXPZ
-
Series9426
-
Number of Ribs1
-
Outside Length2123 mm
- Flex-bonded cords are chemically bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Proprietary construction features an unbeatable combination of flex and load carrying capacity, reduced stretch and incredible cord adhesion properties
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
- Molded notches reduce thermal and bending stresses
-
Alternative Part Number942612120
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Metric-Power™ XPZ2120 Heavy Duty Molded Notch V-Belt, XPZ Section, 10 mm W Top, 2123 mm L Outside, 8 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
CRC® 02021 Lectra Clean® Chlorinated Energized Heavy Duty Non-Flammable Electrical Parts Degreaser, 5 gal Pail, Irritating at High Concentration Odor/Scent, Clear, Liquid Form
Smith Bearing® HR-2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 2 in Dia x 1-1/4 in W Roller, 1-1/8 in Dia x 2 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Gates® Power Transmission Hi-Power® II PowerBand® 2/C124 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 128 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Poly Chain® GT® Carbon™ 14MGT-1890-68 Synchronous Belt, 68 mm W, 1890 mm OAL, 14 mm Pitch, 135 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates Poly Chain™ GT™ Carbon drive system instead of roller chain in your next power transmission application. The patented use of carbon fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness. When combined with Gates Poly Chain GT sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Smith Bearing® CR-3-XB Cylindrical Stud Type Needle Bearing Cam Follower, 3 in Dia x 1-3/4 in W Roller, 1-1/4 in Dia x 2-1/2 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
