Smith BearingĀ® HR-2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 2 in Dia x 1-1/4 in W Roller, 1-1/8 in Dia x 2 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
-
BrandSmith BearingĀ®
-
UPC651041128873
-
Manufacturer Part NumberHR-2-XB
-
CountryUSA
-
Load Capacity10050 lb Dynamic/22000 lb Static
-
Thread Length1 in
-
Thread Size1-1/8-12 UNF-2A
-
Closure TypeSealed
-
TypeCylindrical Stud Type
-
Roller Diameter2 in
-
Roller Material52100 Steel
-
Roller Width1-1/4 in
-
Head TypeHex Socket
-
SeriesHR-XB
-
Stud Diameter1-1/8 in
-
Stud Length2 in
-
Stud TypeHeavy
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 11Y058 |
-
UNSPSC31171530
-
Warranty12 months
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Smith BearingĀ® HR-2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 2 in Dia x 1-1/4 in W Roller, 1-1/8 in Dia x 2 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
GatesĀ® Power Transmission Hi-PowerĀ® II PowerBandĀ® 2/C124 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 128 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Powerā¢ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
GatesĀ® Power Transmission Poly ChainĀ® GTĀ® Carbonā¢ 14MGT-1890-68 Synchronous Belt, 68 mm W, 1890 mm OAL, 14 mm Pitch, 135 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates Poly Chainā¢ GTā¢ Carbon drive system instead of roller chain in your next power transmission application. The patented use of carbon fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness. When combined with Gates Poly Chain GT sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Smith BearingĀ® CR-3-XB Cylindrical Stud Type Needle Bearing Cam Follower, 3 in Dia x 1-3/4 in W Roller, 1-1/4 in Dia x 2-1/2 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
Smith BearingĀ® CR-5/8-X Cylindrical Stud Type Needle Bearing Cam Follower, 5/8 in Dia x 7/16 in W Roller, 1/4 in Dia x 3/4 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
