Gates NOTCHED GRIP V-BELTS GAT BX-140
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
-
BrandGates® Power Transmission
-
UPC72053513554
-
Manufacturer Part NumberBX140
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
ColorBlack
-
TypeHeavy Duty Molded Notch
-
Section SizeBX
-
Series9013
-
Number of Ribs1
-
Outside Length143 in
-
Minimum Pulley Diameter4.775 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number90132140
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
91 SERIES LIGHT CHROME BASES-REDA91CB >
9" PAPER PLATES--CS/1000-WHY10100 >
BBI 455426 Fully Threaded Cap Screw, 5/8-11, 1-1/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455426 Fully Threaded Cap Screw, 5/8-11, 1-1/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Justrite® 09308 Foot Operated Oily Waste Can With Self-Closing SoundGard™ Cover, 10 gal Capacity, 13.938 in Dia x 18-1/4 in H, Steel, Red
Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. SoundGard™ oily waste cans include a sound muffling pad inside lid to reduce lid-closure noise by nearly 200% over standard models. Ideal for laboratories or anywhere it is desirable to lessen disruptive noise. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For safely disposing oily rags and prevent fire hazards in industries like automotive and manufacturing.
IKO BA248ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 1-1/2 in Dia Bore, 1-7/8 in OD, 1 Row, 1/2 in W, 12900 N Dynamic/17900 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
