Ramset® C32CW CW Series Single Shot Powder Load, 0.22 Caliber, Green, 3 Level, For Use With 721, M70, HD22/RS22, DXE37 and DXE72 Powder Actuated Fastening Tools
ITW Ramset® powder loads and tools match tolerances to provide optimum power within recognized national velocity standards.
-
BrandRamset®
-
UPC662520006018
-
Manufacturer Part NumberC32CW
-
CountryUSA
-
ColorGreen
-
TypeSingle Shot
-
SeriesCW Series
-
Suitable For Use With721, M70, HD22/RS22, DXE37 and DXE72 Powder Actuated Fastening Tools
| Cross-Reference Number |
|---|
| 329200 |
-
UNSPSC31162400
-
Package Description100/BX
-
Catalog
Recently Viewed
Ramset® C32CW CW Series Single Shot Powder Load, 0.22 Caliber, Green, 3 Level, For Use With 721, M70, HD22/RS22, DXE37 and DXE72 Powder Actuated Fastening Tools
ITW Ramset® powder loads and tools match tolerances to provide optimum power within recognized national velocity standards.
1.181" X 2.441" X .276" RADIAL SHAFT DOUBLE LIP OIL SEAL. NITRILE RUBBER LIP MATERIAL
3/8" X 20 DOT APPROVED GRADE 70 BINDER CHAIN WITH CLEVIS GRAB HOOKS - Ideal for truck tie downs and other transport applications. Not intended for overhead lifting.
Dichtomatik N70321 O-Ring, 321 Dash Number, 1.162 in ID x 1.582 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik N70324 O-Ring, 324 Dash Number, 1.35 in ID x 1.77 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
SANDING BELTS-SAI57806>
