Gates® Power Transmission PowerGrip® 390H200 Heavy Timing Belt, 2 in W, 39 in OAL, 1/2 in Pitch, 78 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566796
-
Manufacturer Part Number390H200
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width2 in
-
Series9257
-
Number of Teeth78
-
Overall Length39 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573405
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 390H200 Heavy Timing Belt, 2 in W, 39 in OAL, 1/2 in Pitch, 78 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
66-PC-5/32-2 5/32 Tube x 1/8" -female Pipe Thread Connector
5/32 TUBEX1/8" -FEMALE PIPE THREAD CONNECTOR
Gates® Power Transmission PowerGrip® 370H150 Heavy Timing Belt, 1-1/2 in W, 37 in OAL, 1/2 in Pitch, 74 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
NIBCO® Press System® 9043200PC PC606 Elbow, 1-1/2 in Nominal, Press End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper 45-degree elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 45 degrees.
Gates® Power Transmission PowerGrip® 420H300 Heavy Timing Belt, 3 in W, 42 in OAL, 1/2 in Pitch, 84 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 220H200 Heavy Timing Belt, 2 in W, 22 in OAL, 1/2 in Pitch, 44 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
