Bando Synchro-LinkĀ® 394L050G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1/2 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
-
BrandBando
-
UPC649717067397
-
Manufacturer Part Number394L050G
-
CountryUSA
-
Pitch3/8 in
-
Temperature Range-22 to 194 deg F Ambient
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeTrapezoidal Synchronous
-
Width1/2 in
-
SeriesL Series
-
Number of Teeth105
-
Overall Length39.38 in
- Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments
- Heavy torque loads won't fatigue this super strong cord
- S and Z orientation of the cords aid in minimizing belt tracking problems
- Precision formed, oil and heat resistant neoprene teeth have a shear resistance equal to the tensile strength of the belt (under standard "6 teeth in mesh" tests)
- Tooth design and tight manufacturing tolerances provide full surface contact between belt and pulley for smooth running characteristics
- The tooth surface is protected by a low friction, clean running, wear resistant woven nylon facing
- Seamless construction eliminates vibration
-
Alternative Part Number394L050
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsARPM Standard|RMA IP-24
-
Warranty1 year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Bando Synchro-LinkĀ® 394L050G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1/2 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
GatesĀ® Power Transmission Super HCĀ® QD9/5V13.20 Heavy Duty Multiple Groove Sheave, 3-15/16 in QDĀ® Bore, 13.2 in OD, 9 Grooves, 6-1/2 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HCā¢ and Super HC PowerBandĀ® belts.
GatesĀ® Power Transmission Super HCĀ® PowerBandĀ® 5/5V750 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 75 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HCā¢ V-belts also have exclusive Gates construction features for longer life on your drives.
RAK-1-11/16 1-11/16"-ID Low Pillow Block
1-11/16"-ID LOW PILLOW BLOCK UNITS-INARAK111/16>
GatesĀ® MegaCrimpā¢ couplings are designed for use with GatesĀ® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimpā¢ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
GreenleeĀ® Little KickerĀ® 1810 Hand Pedal Offset Bender, For Pipe Dia 1/2 in EMT
GreenleeĀ® Little KickerĀ® 1810 Hand Pedal Offset Bender, For Pipe Dia 1/2 in EMT
