Gates® Power Transmission PowerGrip® 1000H200 Heavy Timing Belt, 2 in W, 100 in OAL, 1/2 in Pitch, 200 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566949
-
Manufacturer Part Number1000H200
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width2 in
-
Series9257
-
Number of Teeth200
-
Overall Length100 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573420
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 1000H200 Heavy Timing Belt, 2 in W, 100 in OAL, 1/2 in Pitch, 200 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-1/2" X 1-1/2" X 1/2" COPPER TEE-NIB611R11/2X1/2 >
Gates® Power Transmission PowerGrip® 250XL037 Extra Light Timing Belt, 3/8 in W, 25 in OAL, 0.2 in Pitch, 125 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
EXCELLENT CHEMICAL RESISTANCE, GLASS REINFORCED POLYPROPYLENE. HEAVY DUTY-SCHEDULE 80. NPT THREAD. MAXIMUM OPERATING PRESSURE 300 PSI
-BAJHB075050 >
THESE BANJO HOSE BARBS ARE PRECISION MOLDED IN POLYPROPYLENE AND ARE GLASS REINFORCED FOR STABILITY, STRENGTH, AND TOUGHNESS. BANJO STRAIGHT HOSE BARB HAS A 1/4" MALE NPT WITH A 1/4: HOSE SHANK. HOSE BARBS ARE MOLDED SPECIFICALLY TO FIT PROPERLY INTO HOSES. 1/4" -2
- BAJHB050075 >
BANJO RN-075-050 3/4" X 1/2" MNPT X FNPT REDUCING NIPPLE (SCHEDULE 80 POLYPROPYLENE)
REDUCING NIPPLE, 3/4" X 1/2" FITTING PIPE SIZE, SCHEDULE 80, 150 PSI, BLACK, POLYPROPYLENE
-BAJRN075050 >
