Bando Synchro-Link® 394L100G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
-
BrandBando
-
UPC649717067410
-
Manufacturer Part Number394L100G
-
CountryUSA
-
Pitch3/8 in
-
Temperature Range-22 to 194 deg F Ambient
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeTrapezoidal Synchronous
-
Width1 in
-
SeriesL Series
-
Number of Teeth105
-
Overall Length39.38 in
- Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments
- Heavy torque loads won't fatigue this super strong cord
- S and Z orientation of the cords aid in minimizing belt tracking problems
- Precision formed, oil and heat resistant neoprene teeth have a shear resistance equal to the tensile strength of the belt (under standard "6 teeth in mesh" tests)
- Tooth design and tight manufacturing tolerances provide full surface contact between belt and pulley for smooth running characteristics
- The tooth surface is protected by a low friction, clean running, wear resistant woven nylon facing
- Seamless construction eliminates vibration
-
Alternative Part Number394L100
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsARPM Standard|RMA IP-24
-
Warranty1 year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Bando Synchro-Link® 394L100G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
TXT-225-AT Dodge® Torque-Arm® Hydroil® 242087 HXT Double Reduction Speed Reducer, Tapered Bushing Output, 25:1 Gear
Dodge® HXT Torque-Arm® is a hydraulically driven shaft mount helical gear reducer that mounts directly to the driven shaft. Using standard SAE hydraulic motors, the gear motor package is an excellent decision for the toughest environments. HXT is also available in a screw conveyor package (HSCXT) that mounts directly to the trough end of the screw conveyor. By using the optional adapter and drive shaft, HSCXT is an economical decision for portable applications requiring a heavy duty solution.
Anvil® 0318905528 FIG 383 Hex Head Pipe Bushing, 1/2 x 1/4 in Nominal, MNPT x FNPT End Style, 300 lb, Cast Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
HCI Preferred Supplier 28114 Hex Head Bushing, 1 x 1/2 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28114 Hex Head Bushing, 1 x 1/2 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 17042420 Hydraulic Elbow Adapter, 1-7/8-12 x 1-1/4 in Nominal, 37 deg JIC x Code 61 Flange End Style, Steel
HCI Preferred Supplier 17042420 Hydraulic Elbow Adapter, 1-7/8-12 x 1-1/4 in Nominal, 37 deg JIC x Code 61 Flange End Style, Steel
Dixon® FM2025F Reducing Hex Nipple, 2 x 2-1/2 in Nominal, 1-15/32 in L, Brass, FNPT x Male NH NST End Style, Domestic
Dixon® FM2025F Reducing Hex Nipple, 2 x 2-1/2 in Nominal, 1-15/32 in L, Brass, FNPT x Male NH NST End Style, Domestic
