Gates® Power Transmission Synchro-Power® T10-400-25 Metric T Synchronous Belt, 25 mm W, 400 mm OAL, 10 mm Pitch, 40 Teeth, Polyurethane
Gates Synchro-Power™ polyurethane belts are designed for long-lasting and energy-efficient performance on both power transmission and linear applications. They are available in both endless and open-end versions in various sizes, constructions and tooth designs, handling a wide range of loads, speeds and applications.
-
BrandGates® Power Transmission
-
UPC72053917048
-
Manufacturer Part NumberT10-400-25
-
CountryUSA|Canada
-
Pitch10 mm
-
Temperature Range-22 to 176 deg F
-
MaterialPolyurethane
-
Reinforced MaterialSteel
-
TypeMetric T
-
Width25 mm
-
Series7762
-
Number of Teeth40
-
Overall Length400 mm
- Abrasion, chemical and wear resistant for extended life
- Steel tensile cord for length stability
-
Alternative Part Number77622277
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Synchro-Power® T10-400-25 Metric T Synchronous Belt, 25 mm W, 400 mm OAL, 10 mm Pitch, 40 Teeth, Polyurethane
Gates Synchro-Power™ polyurethane belts are designed for long-lasting and energy-efficient performance on both power transmission and linear applications. They are available in both endless and open-end versions in various sizes, constructions and tooth designs, handling a wide range of loads, speeds and applications.
16 TOOTH SPROCKETS FOR #35 CHAIN-IDC35B16F5/8 >
24-TOOTH #80-1 CHAIN SPROCKETS IDC 80-B-24-F-1-1/2
24-TOOTH SPROCKET FOR #80-1 CHAIN
Proto® J6068C C Micrometer Torque Wrench, 1/2 in Drive, Ratcheting Head, 360 to 1800 in-lb, 10 in-lb, 21-1/2 in OAL
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Dichtomatik S70427 O-Ring, 427 Dash Number, 4.725 in ID x 5.275 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
