Gates® Power Transmission PowerGrip® HTD® 5000-20M-115 Synchronous Belt, 115 mm W, 5000 mm OAL, 20 mm Pitch, 250 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
-
BrandGates® Power Transmission
-
UPC072053623819
-
Manufacturer Part Number5000-20M-115
-
CountryUSA
-
Pitch20 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter250.33 mm
-
Width115 mm
-
Series9293
-
Number of Teeth250
-
Overall Length5000 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930707
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 5000-20M-115 Synchronous Belt, 115 mm W, 5000 mm OAL, 20 mm Pitch, 250 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
Gates® Power Transmission PowerGrip® HTD® P52-20M-115 Solid Sprocket, 1-1/2 to 4-1/2 in QD® Bore, 12.863 in OD, 52 Grooves, 13.033 in Dia Pitch, 5 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Milton® 503 500 Single Head Heavy Duty Air Chuck Inflator Gauge With Viewing Window, 3 ft L, 3/8-24 Thread, Die Cast Aluminum
Milton® is well known for inflator gauges. This inflator gauge is made with heavy duty construction which provides long life even under extreme use and conditions. Its single head air chuck comes with a chuck clip to quickly attach. Milton® inflator gauges come with both a magnifying window lens and a full swivel chuck. Has a pressure range of 10 to 160 psi in 2 lb increments. 1/4 in NPT air inlet.
Gates® Power Transmission PowerGrip® HTD® 177-3M-06 Synchronous Belt, 6 mm W, 177 mm OAL, 3 mm Pitch, 59 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
Gates® Power Transmission PowerGrip® HTD® 225-3M-06 Synchronous Belt, 6 mm W, 225 mm OAL, 3 mm Pitch, 75 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
Gates® Power Transmission PowerGrip® HTD® 475-5M-09 Synchronous Belt, 9 mm W, 475 mm OAL, 5 mm Pitch, 95 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
