Koyo Bearing METRIC TAPERED ROLLER BEARING SETS KOY 32210-JR
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790118609
-
Manufacturer Part Number32210JR
-
CountryUSA
-
Load Capacity85 kN Dynamic/105 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed4300 rpm Grease/5700 rpm Oil
-
TypeCaged
-
Width24.75 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter90 mm
-
Bore Diameter50 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code
-
Alternative Part NumberHC32210JR
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
3/8" DIAMETERX1" DOWEL PIN-HOL01094 >
Koyo LM11749 Type-TS Cone, 11/16 in Dia Bore, 0.575 in W Cone, 0.05 in Max Shaft Fillet Radius, 31.8 kN Load, For Use With 1-Row Tapered Roller Bearings
Martin 2012 1 7/8 Standard Taper Lock Bushing, 1-7/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
MORSE® 43428 1896 Center Cutting Double End Regular Length End Mill, 3/4 in Dia Cutter, 1-5/16 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 5 in OAL, Bright
