Koyo 32026JR Metric Series Caged Tapered Roller Bearing, 130 mm Dia Bore, 200 mm OD, 1 Row, 45 mm W, 340 kN Dynamic/563 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790021459
-
Manufacturer Part Number32026JR
-
CountryUSA
-
Load Capacity340 kN Dynamic/563 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed1800 rpm Grease/2300 rpm Oil
-
TypeCaged
-
Width45 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter200 mm
-
Bore Diameter130 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code "C" which is added as a suffix to bearing numbers
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code "J" as suffix
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Koyo 32026JR Metric Series Caged Tapered Roller Bearing, 130 mm Dia Bore, 200 mm OD, 1 Row, 45 mm W, 340 kN Dynamic/563 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
Browning® 1228832 Finished Bore Straight Miter Gear With Hardened Teeth, Keyway and Setscrew, 3/4 in Dia Bore
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
1/4" -OD YELLOW POLY TUBE--RL/100'-COIPE0417100Y >
12.5" X 21.75" ACME EC-30 FILTER-AAF992111 >
Browning® 187811 TP50M Ball Detent Overload Clutch, 1-7/16 in Dia Bore, 6-1/4 in OD, 1200 to 3600 in-lb Torque, 3.19 in OAL
The Browning® Torq/Pro® overload clutch is a release type ball detent style torque overload device with a single position reset configuration. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Inherent in the design is accuracy, reversibility, a torque setting scale and a switch detector plate. An asymmetrical ball detent pocket pattern allows engagement in only one position. Torque capacity up to 63300 in-lb and speed ranges up to 1200 rpm.
Browning® 1229251 Minimum Plain Bore Straight Tooth Miter Gear, 10 Diametral Pitch, 20 deg Pressure Angle, 20 Teeth, 2 in Dia Pitch, 0.44 in W Face, 3/4 to 7/8 in Dia Bore, Unhardened Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
