M.K. Morse® 139069 General Purpose Hole Saw Arbor
Morse MA45PSN (139069), spring loaded arbor provides a 7/16" solid shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.
-
BrandMorse®
-
UPC050326139069
-
Manufacturer Part Number139069
-
CountryUSA|Canada
-
MaterialHSS
-
TypeGeneral Purpose
-
Applicable MaterialsFerrous and Nonferrous Metals, Woods, Composites, and Plastics
-
Hole Saw Diameter1-1/4 to 6-5/8 in
-
Shank ShapeHex
-
Shank Size7/16 in
-
Overall Length4-5/8 in
-
Pilot Drill Size1/4 x 3-3/32 in
- High speed steel pilot drill
- 5/8 to 18 in thread pitch
- Sping loaded, pin drive
- Fits hole saws 1-1/4 in diameter to 6-5/8 in
- SDS arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | FZ50139038 |
-
Alternative Part NumberMA45PS
-
UNSPSC27112811
-
Package DescriptionEACH
-
WarrantyLimited
-
Warranty Information
-
Catalog
Recently Viewed
Morse MA45PSN (139069), spring loaded arbor provides a 7/16" solid shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
20 OZ. LOOSE TWIST MOP HEAD FOR HIGH BUILT APPEARANCE. A SOFT, LINT FREE WET MOP HEAD. HEADBAND SIZE: 1-1/4" LOOSE TWIST MOP THAT IS LINT-FREE.
- JWH642258>
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
