Torrington 1-1/2"-ID THRUST NEEDLE BEARINGS TOR NTA-2435
Thrust Needle Roller and Cage Assemblies are the complements of small diameter needle rollers, arranged in spoke-like configuration. Needle rollers are equally spaced means of cage, its web section separates the rollers and provides guidance to keep them tracking in an orbital path. The purpose of these assemblies is to transmit a thrust load between two relatively rotating objects while greatly reducing friction. Thrust Needle Roller and Cage Assemblies also can be utilized with lipped washer to serve as raceway surface for the needle rollers. Washers can be supplied separately or can be mechanically unitized to the Thrust Needle Roller and Cage Assemblies for ease of handling.
-
BrandKoyo
-
UPC605790205330
-
Manufacturer Part NumberNTA-2435
-
CountryUSA
-
Load Capacity23.22 kN Dynamic/117.88 kN Static
-
Temperature Rating-30 to 110 deg C
-
MaterialHigh Carbon Chrome Steel Bearing/Carbon Steel Cage
-
Maximum Speed7600 rpm Oil
-
TypeCaged Round Bore Single Row
-
Width0.0781 in
-
SeriesNTA Inch Series
-
Outside Diameter2.187 in
-
Bore Diameter1-1/2 in
- One-way fool-proof assembly features, anti-rotation locking features and lubrication flow enhancements
- Best used for high axial loads that require a thin cross section
- High speed performance and application flexibility
-
UNSPSC31171541
-
Standards/ApprovalsABEC1
Recently Viewed
Thrust Needle Roller and Cage Assemblies are the complements of small diameter needle rollers, arranged in spoke-like configuration. Needle rollers are equally spaced means of cage, its web section separates the rollers and provides guidance to keep them tracking in an orbital path. The purpose of these assemblies is to transmit a thrust load between two relatively rotating objects while greatly reducing friction. Thrust Needle Roller and Cage Assemblies also can be utilized with lipped washer to serve as raceway surface for the needle rollers. Washers can be supplied separately or can be mechanically unitized to the Thrust Needle Roller and Cage Assemblies for ease of handling.
4" X 1" X 1/2" SILICONE STONES-STICSB24>
APPLETON TC-507 NON-INSULATED STRAIGHT SET SCREW CONNECTOR WITH LOCKNUT, 2-1/2" TRADE
MALE NPS THREAD CONNECTION, 1.04: THREAD LENGTH. CONCRETE-TIGHT WHEN TAPED. COMBINATION HEADSET SCREWS. PRE-SET/PRE-STAKED SET SCREWS, DOUBLE SET SCREW
-APLTC507 >
ELKHART 107-L-1/2 Long Turn Tube 90 deg Elbow, 1/2 in, Solder, Copper, Domestic
The production of copper fittings is environmentally safe, and the industry is the undisputed leader in recycling. Over half of the copper used in manufacturing EPC copper fittings is from recycled sources. These solder joint fittings are available in 1/8 to 8 in sizes.
35'-CORD EXT/CORD LIGHT REELS-RECL4035A1635>
ELECTRICAL SWITCH BOX HAS METAL EARS, SWITCH BRACKET, AND IS FIBERGLASS CONSTRUCTION-JWH500826 >
