RBC® SJ8517 Pitchlign® SJ Series Heavy Duty Precision Ground Needle Roller Bearing, 3 in Dia Bore, 3-3/4 in OD, 1 Row, 1-3/4 in W, 54100 lb Load
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
-
BrandRBC®
-
UPC637400016944
-
Manufacturer Part NumberSJ8517
-
CountryUSA
-
Load Capacity54100 lb
-
Cage MaterialSteel
-
Temperature Rating-40 to 300 deg F
-
Maximum Speed4500 rpm
-
Closure TypeOpen
-
TypeHeavy Duty
-
Width1-3/4 in
-
SeriesPitchlign® SJ Series
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter3-3/4 in
-
Bore Diameter3 in
- Long life, caged roller bearing
- Rollers guided by cage for reduced misalignment and reduced friction
- Precision ground on all surfaces
- Compact design allows for high load capacity and small cross section
- Unsealed design for maximum capacity
- 20400 lb dynamic/54100 lb static
-
UNSPSC31171512
-
Package Description1/PK
-
Standards/ApprovalsASPR|CAS|DFAR|FAR Standards|MS51961
-
Warranty90 Days
-
Catalog
Recently Viewed
RBC® SJ8517 Pitchlign® SJ Series Heavy Duty Precision Ground Needle Roller Bearing, 3 in Dia Bore, 3-3/4 in OD, 1 Row, 1-3/4 in W, 54100 lb Load
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
Nice® 608VBF53 600® Unground Thrust Bearing, 0.9 in Dia Bore, 1.89 in OD, 0.594 in W, 1326 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
Nice® 610VBF53 600® Unground Thrust Bearing, 1.031 in Dia Bore, 1.9688 in OD, 5/8 in W, 1404 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
RBC® SJ7173 Pitchlign® SJ Series Heavy Duty Precision Ground Needle Roller Bearing, 7/8 in Dia Bore, 1-3/8 in OD, 1 Row, 3/4 in W, 6700 lb Load
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
RBC® SJ7234 Pitchlign® SJ Series Heavy Duty Precision Ground Needle Roller Bearing, 1-1/4 in Dia Bore, 1-3/4 in OD, 1 Row, 1 in W, 14200 lb Load
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
