Precision Deep Groove Ball Bearings
NSK 6207TCG12P4 Super Precision Deep Groove Ball Bearing, 35 mm Dia Bore, 72 mm OD, 1 Row, 17 mm W, 25700 N Dynamic/15300 N Static Load
NSK is the World Leader in Deep Groove Ball Bearings. Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
Nice® ER20 ER Series Non-Fill Slot Precision Deep Groove Ball Bearing With Extended Inner Ring, 1-1/4 in Dia Bore, 2.835 in OD, 1 Rows, 1-11/16 in W, 5755 lb Load
Nice® ER20 ER Series Non-Fill Slot Precision Deep Groove Ball Bearing With Extended Inner Ring, 1-1/4 in Dia Bore, 2.835 in OD, 1 Rows, 1-11/16 in W, 5755 lb Load
Nice® 1620DCTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 7/16 in Dia Bore, 1-3/8 in OD, 1 Rows, 7/16 in W, 850 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Nice® 1614DSTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 3/8 in Dia Bore, 1-1/8 in OD, 1 Rows, 3/8 in W, 475 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Nice® 1607DSTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 7/16 in Dia Bore, 0.9063 in OD, 1 Rows, 5/16 in W, 300 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Recently Viewed
RIDGID® 40607 Ferrule, For Use With: Model 1224 Pipe and Bolt Threading Machine
RIDGID® 40607 Ferrule, For Use With: Model 1224 Pipe and Bolt Threading Machine
EPC 10032048 118 Solder Concentric Fitting Reducer, 1/2 x 3/8 in, FTG x Solder, Copper, Domestic
The production of copper fittings is environmentally safe, and the industry is the undisputed leader in recycling. Over half of the copper used in manufacturing EPC copper fittings is from recycled sources. These solder joint fittings are available in 1/8 to 8 in sizes.
Milwaukee® 5318-DE Standard Chisel Boot, For Use With SDS Max® Rotary Hammers, 1 in W Blade, 5-3/4 x 3-1/2 in Shank, Plastic
The Milwaukee 5318-DE SDS max chisel boot provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 5318-DE SDS max chisel boot is optimized for the 2717-22 and 5317-21 Milwaukee SDS max rotary hammers for chipping applications with bull point and flat chisels up to 1-1/8 in. in diameter. Its adjustable strap secures the hose away from the application allowing for increased productivity. Attach to the Milwaukee 8960-20 8 Gallon dust extractor for a complete OSHA table 1 compliant solution.
Proto® J364-T90 Angle Replacement Tip Set, 90 deg, 0.12 in, For Use With J364 Retaining Ring Plier and J365 Retaining Ring Plier, Alloy Steel
