Dodge® 069404 107 Imperial Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 4.81 to 5.2 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6.8 in OAL x 3.88 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
-
BrandDodge®
-
UPC782475307630
-
Manufacturer Part Number069404
-
CountryUSA
-
Load Capacity20800 lb Dynamic/21000 lb Static
-
Locking DeviceAdapter Mounted
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed3975 rpm
-
TypeImperial
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Series107
-
Base Width1.95 in
-
Base to Bore Centerline1.88 in
-
Bolt Center-to-Center Length4.81 to 5.2 in
-
Bore Diameter1-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height3.88 in
-
Overall Length6.8 in
-
Overall Width2.63 in
- Push pull adapter mount
- Grease limiting speeds 30% higher than set screw mounts
- Patented adapter mounting system
- Superior holding power reduces the fretting corrosion caused by vibration
- Seal/land on OD of inner ring maintains full contact pressure even when misaligned
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100738743 |
| Motion Industries | 02317633 |
-
Alternative Part NumberP2B-IP-107R
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 069404 107 Imperial Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 4.81 to 5.2 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6.8 in OAL x 3.88 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
HYDRAULIC HOSE ENDS >BW-1212-PA 100089-DAY12FHSA12BW >
3/4" STAINLESS STEEL PLAIN END PIPE (FT)-JPW3/4SSPE >
3.5-GPM P/WASHER TURBO NOZZLES-SPM374104>
500246 Top Wind Trailer Jack Red Knob Kit, Used On Bulldog Hammer Blow 150, 160, And 170 Series Trailer Jacks, 2000-5000 Lb Capacity
TOP WIND TRAILER JACK RED KNOB KIT, USED ON BULLDOG HAMMER BLOW 150, 160, AND 170 SERIES TRAILER JACKS, 2000-5000 LB CAPACITY MODELS-HBC500246 >
Dichtomatik S70114 O-Ring, 114 Dash Number, 0.612 in ID x 0.818 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
