Dodge® 069410 Imperial Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.06 to 6.44 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.56 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
-
BrandDodge®
-
UPC782475307685
-
Manufacturer Part Number069410
-
CountryUSA
-
Load Capacity22000 lb Dynamic/24000 lb Static
-
Locking DeviceAdapter Mounted
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed3520 rpm
-
TypeImperial
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width2-1/2 in
-
Base to Bore Centerline2-1/4 in
-
Bolt Center-to-Center Length6.06 to 6.44 in
-
Bore Diameter1-15/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4.56 in
-
Overall Length8.38 in
-
Overall Width2.86 in
- Push pull adapter mount
- Grease limiting speeds 30% higher than set screw mounts
- Patented adapter mounting system
- Superior holding power reduces the fretting corrosion caused by vibration
- Seal/land on OD of inner ring maintains full contact pressure even when misaligned
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100738745 |
| Motion Industries | 02317657 |
-
Alternative Part NumberP2B-IP-115R
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 069410 Imperial Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.06 to 6.44 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.56 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
Rexnord® 10435713 2000 Normal Duty Pillow Block Spherical Roller Bearing, 2-11/16 in Dia Bore, 8-1/8 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10-7/16 in OAL x 6-7/16 in OAH
Rex® 10435713 2000 Normal Duty Pillow Block Spherical Roller Bearing, 2-11/16 in Dia Bore, 8-1/8 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10-7/16 in OAL x 6-7/16 in OAH
MORSE® 58010 5944 Center Cutting Regular Length Single End End Mill, 5/32 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2 in OAL, Bright
DOUBLE SHIELDED BALL BEARING-GUL63132Z >
Moline Bearing 19321111 Type E Pillow Block Bearing, 1-11/16 in Dia Bore, 6-1/16 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-7/8 in OAL x 4-1/4 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 11⁄16 in (1.6875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
MORSE® 57940 5943 Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
