Browning® 767199 SLS 100 Light Duty Straight Bore Ball Bearing Insert, 7/8 in Dia Bore, 2.042 in OD, 1 Rows, 1-7/64 in W, 2801 lb Dynamic/1651 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662460343938
-
Manufacturer Part Number767199
-
CountryUSA
-
Load Capacity2801 lb Dynamic/1651 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3500 rpm
-
Closure TypeDouble Seal
-
TypeLight Duty Straight Bore
-
Seal MaterialNitrile Rubber
-
Width1-7/64 in
-
SeriesSLS 100
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter2.042 in
-
Bore Diameter7/8 in
- Cylindrical O.D. narrow inner ring bearing insert with no lubrication
- Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews
- Single lip contact seal
- Cylindrical outer diameter
- Non-relubricatable
- Without Snap Ring
- Cylindrical O.D. narrow inner ring bearing insert with no lubrication_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Single lip contact seal
-
Alternative Part NumberSLS-114
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Browning® 767199 SLS 100 Light Duty Straight Bore Ball Bearing Insert, 7/8 in Dia Bore, 2.042 in OD, 1 Rows, 1-7/64 in W, 2801 lb Dynamic/1651 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® 765228 VER200 Standard-Duty Straight Bore Ball Bearing Insert With Snap Ring, 3/4 in Dia Bore, 1.8504 in OD, 1 Rows, 1-7/32 in W, 2611 lb Dynamic/1444 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Worms and worm gears are used to power right angle, non-intersecting shafts. In normal applications the worm gear is driven by the worm. The most popular use of worms and worm gears is in applications where high ratio speed reduction is desired in a relatively limited space. They are also used in applications where high resistance to the worm gear shaft reversing and driving back through the worm is desired.
Dodge® 065296 215 Special Duty Type C Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 11.13 to 12.38 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 14-1/4 in OAL x 9.88 in OAH
Dodge® 065296 215 Special Duty Type C Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 11.13 to 12.38 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 14-1/4 in OAL x 9.88 in OAH
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
DRILLCO 480N014 Type B Heavy Duty Jobber Length Drill Bit, #14 Drill - Wire, 0.0748 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
