Sealmaster 3-3/16"-ID SPH/OD INSERT BEARINGS SEA 3-33
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000861
-
Manufacturer Part Number700095
-
CountryUSA
-
Load Capacity18681 lb Dynamic/14496 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2125 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width3-3/8 in
-
Bearing MaterialSteel
-
Outside Diameter5.9055 in
-
Bore Diameter3-3/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-33
-
UNSPSC31171537
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
ECCENTRIC LOCKING BEARING COLLAR-CHIS1200K >
#16 - #14 8-STUD SPADE WIRE TERMINAL-DEL862085 >
16 RIBS, 3...5MM, 0.14"/3.30MM THICK, BELT MADE OF POLYESTER CORD, THE PITCH WIDTH IS 0.092"/2.34MM
- PIX250J16>
Leviton® line of heavy duty specification grade receptacles are designed and manufactured to withstand the most demanding environments. Available in a wide variety of configurations, including isolated ground, tamper resistant and more, these commercial grade devices are the electrical contractors choice for use in hotels, schools, hospitals and commercial office buildings.
MORSE® 38148 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
