Sealmaster 1-15/16"-ID EXPANSON BEARING UNITS SEA SR-2-115
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461009635
-
Manufacturer Part Number701175
-
CountryUSA
-
Load Capacity7889 lb Dynamic/5216 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 250 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3550 rpm
-
TypeExpansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width2.031 in
-
SeriesAR Series
-
Bearing MaterialSteel
-
Outside Diameter3-7/8 in
-
Bore Diameter1.938 in
- Skwezloc concentric locking for near perfect concentricity
- Felt labyrinth seal and flinger for dry and dusty environment
- Unique land riding retainer design provides superior pocket clearance that allows for 360 deg grease circulation around the rolling elements resulting in better retained and utilized lubrication
- Zone hardened inner race
- Metal nameplate riveted to the housing allows for easy identification even after years of operation
- Lithium complex NLGI #2 grease with an EP additive
- Bearing insert installed in brass expansion ring_x005f Skwezloc concentric locking for near perfect concentricity_x005f Felt labyrinth seal and flinger for dry and dusty environment_x005f Unique land riding retainer design provides superior pocket clearance that allows for 360 deg grease circulation around the rolling elements resulting in better retained and utilized lubrication
-
Alternative Part NumberAR-2-115
-
UNSPSC31171504
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
GP® 1017MD Deep Length Socket, 3/8 in Drive, 17 mm Socket, 6 Points
Browning® Gearbelt® 3514023 Type D Arm Synchronous Timing Pulley, 1/2 to 2-15/16 in QD® Bore, 9.495 in OD, 60 Grooves, 9.549 in Dia Pitch, 1-13/16 in W Face
Browning® Gearbelt® 3514023 Type D Arm Synchronous Timing Pulley, 1/2 to 2-15/16 in QD® Bore, 9.495 in OD, 60 Grooves, 9.549 in Dia Pitch, 1-13/16 in W Face
GP® 1018MD Deep Length Socket, 3/8 in Drive, 18 mm Socket, 6 Points
MORSE® 51086 5374 Standard Length Jobber Length Drill Bit, #7 Drill - Wire, 0.201 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
70-MM SPHERICAL BEARING ADAPTER - WESSNW16X70MM>
