Sealmaster 1-15/16"-ID SPH/OD INSERT BEARINGS SEA 2-115
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000328
-
Manufacturer Part Number700034
-
CountryUSA
-
Load Capacity7889 lb Dynamic/5216 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3550 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width2-1/32 in
-
Bearing MaterialSteel
-
Outside Diameter3.5433 in
-
Bore Diameter1-15/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-115
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Koyo B-108 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 13/16 in OD, 1 Row, 1/2 in W, 2450 lb Dynamic/4430 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Loctite® 135514 620™ High Temperature Retaining Compound, 50 mL Bottle, Liquid, Green, 1.1599999999999999
LOCTITE® 620™ retaining compound high temperature is recommended for high temperature retaining of parts with a clearance or interference fit, i.e., retaining bushings, bearings, seals, fans and liners. Requires heat cure to achieve temperature resistance
Koyo B-1416-OH Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing With Oil Hole, 7/8 in Dia Bore, 1-1/8 in OD, 1 in W, 7100 lbf Dynamic/14570 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Loctite® 231121 641™ Medium Strength Retaining Compound, 50 mL Bottle, Liquid, Yellow, 1.07
Loctite® 231121 641™ Medium Strength Retaining Compound, 50 mL Bottle, Liquid, Yellow, 1.07
Morse® XK9005 Torque Arm Kit, For Use With Raider® Plus Style UHT/QHT/CHT Size 4-1/2 in Center Distance Worm Gear Reducers, 9.56 in Bolt Center-to-Center Length, Steel
