Browning® 767695 VS Series Medium Duty Straight Bore Ball Bearing Insert With Seal Flinger, 1-1/2 in Dia Bore, 3.347 in OD, 1.938 in W, 7901 lb Dynamic/5139 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289526543
-
Manufacturer Part Number767695
-
CountryUSA
-
Load Capacity7901 lb Dynamic/5139 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3000 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Straight Bore
-
Width1.938 in
-
SeriesVS Series
-
Bearing MaterialSteel
-
Outside Diameter3.347 in
-
Bore Diameter1-1/2 in
- Single setscrew locking
- Single lip contact seal
- Zone hardened inner race
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
-
Alternative Part NumberVS-324
-
UNSPSC31171504
-
Warranty1 Year
-
Package DescriptionEACH
-
Specification Sheet
-
Catalog
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Browning® 767695 VS Series Medium Duty Straight Bore Ball Bearing Insert With Seal Flinger, 1-1/2 in Dia Bore, 3.347 in OD, 1.938 in W, 7901 lb Dynamic/5139 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
DRILLCO 400N124 Type B Heavy Duty Jobber Length Drill Bit, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
6201-2-RS a standard light-duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 12 mm (0.472 inches)
• Outside Diameter (OD): 32 mm (1.260 inches)
• Width: 10 mm (0.394 inches)
• Max Speed: ~15,000 to 17,000 RPM (depending on grease specifications)
• Material: Premium chrome steel (SAE-52100)
MORSE® 58854 5957 Ball Nose Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL, Bright
5/32" X 4-1/2" ROLL PIN PUNCH-ARS70266 >
The 6210 Fiberglass 10 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
