6201-2-RS a standard light-duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 12 mm (0.472 inches)
• Outside Diameter (OD): 32 mm (1.260 inches)
• Width: 10 mm (0.394 inches)
• Max Speed: ~15,000 to 17,000 RPM (depending on grease specifications)
• Material: Premium chrome steel (SAE-52100)
Recently Viewed
6201-2-RS a standard light-duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 12 mm (0.472 inches)
• Outside Diameter (OD): 32 mm (1.260 inches)
• Width: 10 mm (0.394 inches)
• Max Speed: ~15,000 to 17,000 RPM (depending on grease specifications)
• Material: Premium chrome steel (SAE-52100)
MORSE® 58854 5957 Ball Nose Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL, Bright
5/32" X 4-1/2" ROLL PIN PUNCH-ARS70266 >
The 6210 Fiberglass 10 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Browning® 1069335 Split Taper Bushing, 11/16 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
