Loctite 300-ML #587 SILICONE GASKET MAKER LOC 234590
LOCTITE® SI 587™ blue high performance RTV silicone gasket maker is a one part, formed-in-place, RTV silicone that forms tough, flexible gaskets directly on the flange. Recommended for sealing all types of flanges including stamped sheet metal
-
BrandLoctite®
-
UPC079340587755
-
Manufacturer Part Number234590
-
CountryUSA|Canada
-
Temperature Rating-75 to 500 deg F
-
Chemical TypeOxime Silicone
-
ColorBlue
-
Type1-Part High Performance Low Odor Non-Flammable Non-Toxic
-
VOC Content3.3300000000000003E-2
-
Container Size300 mL
-
Adheres toMetal
-
Container TypeCartridge
-
SeriesSI 587™
-
Curing Time24 hr
-
Work Life30 min
-
Specific Gravity1.31
- Superior adhesion and flexibility
- Improved oil resistance
- Replaces most cut gaskets
- Can be used as a gasket maker or dressing
- Designed for superior bonding properties to oil-contaminated metals
- Resistant to most chemicals and solvents
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 4KM23 |
-
Alternative Part Number58775
-
UNSPSC31201700
-
Package Description1/PK
-
Standards/ApprovalsCFIA Approved|ABS Approved|NSF P1
Recently Viewed
LOCTITE® SI 587™ blue high performance RTV silicone gasket maker is a one part, formed-in-place, RTV silicone that forms tough, flexible gaskets directly on the flange. Recommended for sealing all types of flanges including stamped sheet metal
GRASS AND WEED SLING BLADE CUTTER-JWH713400 >
Loctite® 198819 Flexible Cure Slow Dry Gasket Sealant, 7 oz Tube
Permatex® 82194 Ultra Grey® Low Odor Non-Flammable Non-Toxic Rigid High Torque Gasket Maker, 3.5 oz Container Carded Tube Container
Permatex® ultra Gray® gasket maker is a single component, room temperature vulcanizing gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to perform under the higher load conditions of engines with closely spaced bolt patterns (typically non-US designed) and maintains outstanding oil, water-glycol resistance.
LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket and can be used for pre-cut gaskets.
