Loctite 7-OZ BLACK GASKET SEALANT LOC 198819
Loctite® 198819 Flexible Cure Slow Dry Gasket Sealant, 7 oz Tube
-
BrandLoctite®
-
UPC079340305151
-
Manufacturer Part Number198819
-
CountryUSA|Canada
-
Temperature Rating-65 to 400 deg F
-
Chemical TypeSolvent
-
ColorBlack
-
TypeFlexible Cure Slow Dry
-
VOC Content0.003
-
Container Size7 oz
-
Adheres toCork, Metal, Plastic and Rubber
-
Container TypeTube
-
Specific Gravity1.55
-
Drying Time4 hr
- Gasket sealant 2 extended gasket life, slow-drying, flexible cure
- Sets more slowly to a pliable film best suited for non-rigid, vibrating assemblies
- Use to 400 deg F resistant to gasoline and other solvent
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | LM5030515 |
-
Alternative Part Number30515
-
UNSPSC31201700
-
Package Description1/PK
-
Catalog
Recently Viewed
Loctite® 198819 Flexible Cure Slow Dry Gasket Sealant, 7 oz Tube
Permatex® 82194 Ultra Grey® Low Odor Non-Flammable Non-Toxic Rigid High Torque Gasket Maker, 3.5 oz Container Carded Tube Container
Permatex® ultra Gray® gasket maker is a single component, room temperature vulcanizing gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to perform under the higher load conditions of engines with closely spaced bolt patterns (typically non-US designed) and maintains outstanding oil, water-glycol resistance.
LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket and can be used for pre-cut gaskets.
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
This combination unit features the 4202 fixed position variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
