Retaining Compounds
Loctite® 135527 660™ 1-Part Retaining Compound, 50 mL Tube, Paste, Silver, 1.1
Loctite® 1835201 680™ 1-Part High Strength Retaining Compound, 50 mL Bottle, Liquid, Green, 1.1000000000000001
Loctite® 231121 641™ Medium Strength Retaining Compound, 50 mL Bottle, Liquid, Yellow, 1.07
Loctite® 1835936 638™ High Strength Retaining Compound, 50 mL Bottle, Liquid, Green, 1.1000000000000001
LOCTITE® 620™ retaining compound high temperature is recommended for high temperature retaining of parts with a clearance or interference fit, i.e., retaining bushings, bearings, seals, fans and liners. Requires heat cure to achieve temperature resistance
Loctite® 135513 609™ General Purpose Retaining Compound, 250 mL Bottle, Liquid Form, Green, 1.1
Loctite® 1835205 680™ High Strength Retaining Compound, 10 mL Bottle, Liquid, Green, 1.1000000000000001
Loctite® 1835922 648™ High Strength Retaining Compound, 10 mL Bottle, Liquid, Green, 1.129
Recently Viewed
5/32 SOLID PUNCH 3/8" HEX - ALL25640 >
V-BELTS-BRWC68>
Klein® 32500MAG 11-in-1 Multi-Bit Screwdriver/Nutdriver, 11 Pieces, 3/16 to 1/4 in, #1 to #2, T10 to T15 Range, Cushion Grip Handle, Carbon Steel
The integrated screwdriver / nut driver shaft on the 11-in-1 Magnetic Screwdriver/Nut Driver holds 8 popular tips and converts to 3 nut driver sizes. The shaft contains powerful Rare-Earth magnets for better fastener retention and is interchangeable for quick and easy switch out. The Cushion-Grip™ handle allows for greater torque and comfort. This versatile 11-in-1 multi-tool has everything the professional tradesperson needs to make the job a little easier.
V-BELT-BRWB35>
Hougen® 11075 Cutter Kit, 1/4 in D Cutting
The RIDGID® Model 141 Receding Geared Threader creates consistently clean NPT threads on 2-1/2 to 4-inch diameter pipe. Power by hand, or couple with the various threading machines and power drives (sold separately), for more flexibility. A cam type work holder helps grip the pipe, while the die head cuts the threads. A clutch is included to prevent jamming at the end of the thread.
