SAIT 1-1/2" X 1/2" 120-GRIT FLAPWHEELS SAI 70027
United Abrasives-SAIT 70027 2A Premium Coated Flap Wheel, 1-1/2 in Dia, 1/2 in W Face, 1/4 in Dia Shank, 120 Grit, Fine Grade, Aluminum Oxide Abrasive
-
BrandUnited Abrasives-SAIT
-
UPC699053700274
-
Manufacturer Part Number70027
-
CountryUSA|Canada
-
Face Width1/2 in
-
Maximum Speed20000 rpm
-
TypePremium
-
GradeFine
-
Grit120
-
Abrasive MaterialAluminum Oxide
-
Wheel Diameter1-1/2 in
-
Series2A
-
Attachment TypeSpindle
-
Backing MaterialCotton
-
Backing WeightX-Weight
-
Shank Diameter1/4 in
- Excellent for reducing heat build-up on heat sensitive materials
- Excellent for cleaning, deburring, polishing and blending
- Resin over resin construction for a strong bond resistant to heat and moisture
- Closed coat structure for more material removal
- High quality Egyptian cotton cloth backing provides superior durability
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0833989 |
-
UNSPSC31191600
-
Package Description10/BX
-
SDS
Recently Viewed
United Abrasives-SAIT 70027 2A Premium Coated Flap Wheel, 1-1/2 in Dia, 1/2 in W Face, 1/4 in Dia Shank, 120 Grit, Fine Grade, Aluminum Oxide Abrasive
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
Browning® 3750528 Taper Lock Bushing, 1-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Sioux Chief 840-2PPK General Purpose Floor Drain With Standard Screw, 2 x 3 in Outlet, Hub Connection, PVC Drain
Sioux Chief 840 series general-purpose floor drain shall be used where necessary in drainage systems. Floor drain shall have an ABS/PVC body with SCH 40 hub connection in accordance with ASTM D2661/D2665 and connect to pipe via solvent weld joint. Strainer shall be heel-proof, 19-gauge 430 stainless steel and meet applicable load requirements for intended use.
5/16" DIAMETERX1-1/4" SHOULDER BOLT-HOL08026 >
1/4" OR 3/8" CUTOFF WHEEL ARBORS-AES3804>
